Effect of channel thickness on the particle diffusion and permeability of carbon nanotubes a membrane in reverse electrodialysis process using molecular dynamics simulation

Adopting innovative technology and solutions is critical for ensuring clean water. Several methods may be used to remove salts from water. They may be divided into two categories: membranes and heat. Reverse electrodialysis, which uses a membrane, is an efficient way of separating substances. Prior research investigated system-level factors, but the nanoscale mechanisms that drive ion and water penetration across membranes were poorly understood. This study closed a research gap by investigating the influence of carbon nanotube membrane thickness on particle mobility and fluid dynamics in reverse electrodialysis systems. The research contributed to the enhancement of energy conversion efficiency and membrane performance in reverse electrodialysis systems by offering a comprehensive understanding of the influence of channel thickness on particle transport and selectivity through the carbon nanotube membrane. Molecular dynamics simulations using the LAMMPS software package were conducted to examine the effect of carbon nanotube thickness variation (1-layer vs 2-layer) on fluid flow, ionic current, hydrogen bonding, and fluid density. to the findings, increasing the thickness of a carbon nanotube from one layer to two layers decreased the fluid flow rate to 203.79 atoms/ns and the current from 5.31 e/ns to 5.15 e/ns. Additionally, the number of broken hydrogen bonds decreased from 116 to 105, indicating decreased permeability and increased stability of the hydrogen-bonding network. In addition to offering useful information for the construction of more effective and selective membranes in renewable energy applications, these results provided a molecular understanding of how carbon nanotube thickness affected reverse electrodialysis effectiveness.

[1] I. A. Shiklomanov, "The world’s water resources." pp. 93-126
[2] M. Bradbury, Water City: Practical Strategies for Climate Change: Routledge, 2020
[3] Y. Osada, and T. Nakagawa, Membrane science and technology: CRC Press, 1992.
[4] J. Veerman, M. Saakes, S. J. Metz, and G. Harmsen, “Reverse electrodialysis: evaluation of suitable electrode systems,” Journal of Applied Electrochemistry, vol. 40, pp. 1461-1474, 2010.
[5] A. Cipollina, G. Micale, A. Tamburini, M. Tedesco, L. Gurreri, J. Veerman, and S. Grasman, “Reverse electrodialysis: applications,” Sustainable energy from salinity gradients, pp. 135-180: Elsevier, 2016.
[6] E. Ganesh, “Single walled and multi walled carbon nanotube structure, synthesis and applications,” International Journal of Innovative Technology and Exploring Engineering, vol. 2, no. 4, pp. 311-320, 2013.
[7] K. Szendi, and C. Varga, “Lack of genotoxicity of carbon nanotubes in a pilot study,” Anticancer research, vol. 28, no. 1A, pp. 349-352, 2008
[8] M. Dresselhaus, G. Dresselhaus, P. Eklund, and A. Rao, “The physics of fullerene-based and fullerene-related materials, edited by W. Andreoni,” Physics and Chemistry of Materials with Low-Dimensional Structures, vol. 23, 2000.
[9] V. N. Popov, “Carbon nanotubes: properties and application,” Materials Science and Engineering: R: Reports, vol. 43, no. 3, pp. 61-102, 2004.
[10] R. H. Tunuguntla, R. Y. Henley, Y.-C. Yao, T. A. Pham, M. Wanunu, and A. Noy, “Enhanced water permeability and tunable ion selectivity in subnanometer carbon nanotube porins,” Science, vol. 357, no. 6353, pp. 792-796, 2017.
[11] H. Liu, S. Murad, and C. J. Jameson, “Ion permeation dynamics in carbon nanotubes,” The Journal of chemical physics, vol. 125, no. 8, 2006.
[12] Y. Wang, Q. Li, G. Tang, and N. Zhang, “Recent progress on carbon based desalination membranes and carbon nanomaterial incorporated non-polyamide desalination membranes,” Journal of Environmental Chemical Engineering, vol. 9, no. 4, pp. 105762, 2021.
[13] A. Zoungrana, and M. Çakmakci, “From non‐renewable energy to renewable by harvesting salinity gradient power by reverse electrodialysis: A review,” International Journal of Energy Research, vol. 45, no. 3, pp. 3495-3522, 2021.
[14] M. Tedesco, H. Hamelers, and P. Biesheuvel, “Nernst-Planck transport theory for (reverse) electrodialysis: I. Effect of co-ion transport through the membranes,” Journal of Membrane Science, vol. 510, pp. 370-381, 2016.
[15] A. Moya, “A numerical comparison of optimal load and internal resistances in ion-exchange membrane systems under reverse electrodialysis conditions,” Desalination, vol. 392, pp. 25-33, 2016.
[16] K. Scott, "Microbial fuel cells: transformation of wastes into clean energy," Membranes for Clean and Renewable Power Applications, pp. 266-300: Elsevier, 2014.
[17] T. Rijnaarts, E. Huerta, W. van Baak, and K. Nijmeijer, “Effect of divalent cations on RED performance and cation exchange membrane selection to enhance power densities,” Environmental science & technology, vol. 51, no. 21, pp. 13028-13035, 2017.
[18] Y. Li, A. B. Ali, N. E. F. Tapia, N. Kamolova, S. Salahshour, and R. Sabetvand, “Effect of channel roughness on the particle diffusion and permeability of carbon nanotubes in reverse electrodialysis process applying molecular dynamics simulation,” Journal of Molecular Graphics and Modelling, vol. 134, pp. 108899, 2025.
[19] X. Li, A. B. Ali, H. A. Abbood, N. S. S. Singh, M. Al-Bahrani, D. Abduvalieva, S. Salahshour, and S. Baghaei, “The impact of channel edge type on the particle diffusion and permeability of carbon nanotubes as a membrane in reverse electrodialysis process using molecular dynamics simulation,” International Communications in Heat and Mass Transfer, vol. 164, pp. 108930, 2025.
[20] A. B. Ali, K. H. Qader, M. M. Al-Zahiwat, N. S. S. Singh, S. Salahshour, S. M. Sajadi, and A. Mokhtarian, “Effect of atomic ratio of ions on the particle diffusion and permeability of carbon nanotubes in reverse electrodialysis process using molecular dynamics simulation,” Case Studies in Chemical and Environmental Engineering, vol. 11, pp. 101084, 2025.
[21] B. S. Rathi, and P. S. Kumar, “Electrodeionization theory, mechanism and environmental applications. A review,” Environmental Chemistry Letters, vol. 18, no. 4, pp. 1209-1227, 2020.
[22] A. Bita Chagami, and A. Mohammad Nadirlotaf, "Investigation of the effect of voltage and pH on the separation of copper ions from water by electrolysis method," in the 16th National Congress of Chemical Engineering of Iran, 2017.
[23] A. Khataee, J. Azamat, and G. Bayat, “Separation of nitrate ion from water using silicon carbide nanotubes as a membrane: Insights from molecular dynamics simulation,” Computational Materials Science, vol. 119, pp. 74-81, 2016.
[24] N. Georgescu, R. Minea, and C. Lungu, “Depollution experiments with repetitive pulsed corona plasmas,” Journal of Optoelectronics and Advanced Materials, vol. 7, no. 5, pp. 2501-2506, 2005.
[25] N. Y. Yip, and M. Elimelech, “Comparison of energy efficiency and power density in pressure retarded osmosis and reverse electrodialysis,” Environmental science & technology, vol. 48, no. 18, pp. 11002-11012, 2014.
[26] Q. Chen, Y.-Y. Liu, C. Xue, Y.-L. Yang, and W.-M. Zhang, “Energy self-sufficient desalination stack as a potential fresh water supply on small islands,” Desalination, vol. 359, pp. 52-58, 2015.
[27] T. Gong, and Y. Tang, “Preparation of multifunctional nanocomposites Fe3O4@ SiO2–EDTA and its adsorption of heavy metal ions in water solution,” Water Science and Technology, vol. 81, no. 1, pp. 170-177, 2020.
[28] S. A. Shah, S.-Y. Choi, S. Cho, M. Shahbabaei, R. Singh, and D. Kim, “Modified single-wall carbon nanotube for reducing fouling in perfluorinated membrane-based reverse electrodialysis,” International Journal of Hydrogen Energy, vol. 45, no. 55, pp. 30703-30719, 2020.
[29] X. Tong, B. Zhang, and Y. Chen, “Fouling resistant nanocomposite cation exchange membrane with enhanced power generation for reverse electrodialysis,” Journal of Membrane Science, vol. 516, pp. 162-171, 2016.
[30] H. Kim, D. Kim, H. Seo, H.-Y. Park, J. Choi, H. Kim, J. Yoo, Y.-W. Choi, H. Yang, and S.-C. Jeon, “Facile fabrication of carbon nanotube embedded pore filling ion exchange membrane with high ion exchange capacity and permselectivity for high-performance reverse electrodialysis,” Journal of Membrane Science, vol. 654, pp. 120568, 2022.
[31] H. Hyung, J. D. Fortner, J. B. Hughes, and J.-H. Kim, “Natural organic matter stabilizes carbon nanotubes in the aqueous phase,” Environmental science & technology, vol. 41, no. 1, pp. 179-184, 2007.
[32] S. Ajori, A. Ameri, and R. Ansari, “On the mechanical stability and buckling analysis of carbon nanotubes filled with ice nanotubes in the aqueous environment: a molecular dynamics simulation approach,” Journal of Molecular Graphics and Modelling, vol. 89, pp. 74-81, 2019.
[33] I. Schwyzer, R. Kaegi, L. Sigg, and B. Nowack, “Colloidal stability of suspended and agglomerate structures of settled carbon nanotubes in different aqueous matrices,” Water research, vol. 47, no. 12, pp. 3910-3920, 2013.
[34] J. Wang, G. Román-Pérez, J. M. Soler, E. Artacho, and M.-V. Fernández-Serra, “Density, structure, and dynamics of water: The effect of van der Waals interactions,” The Journal of chemical physics, vol. 134, no. 2, 2011.
[35] A. Abramyan, N. Bessonov, L. Mirantsev, and N. Reinberg, “Influence of liquid environment and bounding wall structure on fluid flow through carbon nanotubes,” Physics Letters A, vol. 379, no. 18-19, pp. 1274-1282, 2015.
[36] S. Dalla Bernardina, E. Paineau, J.-B. Brubach, P. Judeinstein, S. Rouzière, P. Launois, and P. Roy, “Water in carbon nanotubes: the peculiar hydrogen bond network revealed by infrared spectroscopy,” Journal of the American Chemical Society, vol. 138, no. 33, pp. 10437-10443, 2016.
[37] D. C. Rapaport, The art of molecular dynamics simulation: Cambridge university press, 2004.
[38] B. J. Alder, and T. E. Wainwright, “Studies in molecular dynamics. I. General method,” The Journal of Chemical Physics, vol. 31, no. 2, pp. 459-466, 1959.
[39] M. P. Allen, “Introduction to molecular dynamics simulation,” Computational soft matter: from synthetic polymers to proteins, vol. 23, no. 1, pp. 1-28, 2004.
[40] J. E. Lennard-Jones, “Cohesion,” Proceedings of the Physical Society, vol. 43, no. 5, pp. 461, 1931.
[41] M. S. Daw, and M. I. Baskes, “Embedded-atom method: Derivation and application to impurities, surfaces, and other defects in metals,” Physical Review B, vol. 29, no. 12, pp. 6443, 1984.
[42] P. G. Huray, Maxwell's equations: John Wiley & Sons, 2011.
[43] H. J. Berendsen, J. R. Grigera, and T. P. Straatsma, “The missing term in effective pair potentials,” Journal of Physical Chemistry, vol. 91, no. 24, pp. 6269-6271, 1987.
[44] A. K. Rappé, C. J. Casewit, K. Colwell, W. A. Goddard III, and W. M. Skiff, “UFF, a full periodic table force field for molecular mechanics and molecular dynamics simulations,” Journal of the American chemical society, vol. 114, no. 25, pp. 10024-10035, 1992.