Using evolutionary algorithms and group method of data handling ANN for prediction of the viscosity MWCNT-ZnO /oil SAE 50 nano-lubricant

Journal article


Liu, Z., Ali, A. B., Hussein, R. A., Singh, N. S. S., Al-Bahrani, M., Abdullaeva, B., Saeidlou, S., Salahshour, S. and Esmaeili, S. 2025. Using evolutionary algorithms and group method of data handling ANN for prediction of the viscosity MWCNT-ZnO /oil SAE 50 nano-lubricant. International Communications in Heat and Mass Transfer. 163, p. 108749. https://doi.org/10.1016/j.icheatmasstransfer.2025.108749
AuthorsLiu, Z., Ali, A. B., Hussein, R. A., Singh, N. S. S., Al-Bahrani, M., Abdullaeva, B., Saeidlou, S., Salahshour, S. and Esmaeili, S.
Abstract

This study looked at ANNs' ability to predict the rheological properties of MWCNT-ZNO / Oil SAE 50 nano lubricant. Five artificial intelligence algorithms—Group Method of Data Handling (GMDH), Extreme Gradient Boosting (XGBoost), Multivariate Adaptive Regression Splines (MARS), Support vector machine (SVM), and Multilayer Perceptron (MLP)—were employed in this work to forecast this nanofluid. The most optimum objective function (μnf) as an output is the foundation of algorithms used in artificial intelligence. This capacity is developed so that the values predicted by ANN were more consistent with the laboratory numbers by combining GMDH with the metaheuristic approach. This combination enables the metaheuristic algorithm to optimize the evaluation indices and get the predicted data closer to the experimental data by using the GMDH activation parameters as input. For optimization, three metaheuristic algorithms are used, and the combination of GMDH and MOGWO produced the best results. Ultimately, the finest condition that could be achieved is found to have the following input data values: share rate (γ), temperature (T), and solid volume fraction (φ): 0.0625 %, 50 °C, and 5499.6783 s−1 correspondingly.

KeywordsNano-lubricant; Meta-heuristic; Artificial intelligence algorithms; Metaheuristic algorithm
Year2025
JournalInternational Communications in Heat and Mass Transfer
Journal citation163, p. 108749
PublisherElsevier
ISSN0735-1933
Digital Object Identifier (DOI)https://doi.org/10.1016/j.icheatmasstransfer.2025.108749
Official URLhttps://www.sciencedirect.com/science/article/pii/S0735193325001745
Publication dates
Print26 Feb 2025
Publication process dates
Accepted16 Feb 2025
Deposited05 Mar 2025
Accepted author manuscript
License
File Access Level
Open
Output statusPublished
References

[1] B. Bhushan, Friction, in: Tribology and Mechanics of Magnetic Storage Devices, Springer, 1996, pp. 231–365.
[2] D. Demydov, et al., Advanced lubricant additives of dialkyldithiophosphate (DDP)-functionalized molybdenum sulfide nanoparticles and their tribological performance for boundary lubrication, in: Nanoscale Materials in Chemistry: Environmental Applications, ACS Publications, 2010, pp. 137–163.
[3] S.C. Tung, M.L. McMillan, Automotive tribology overview of current advances and challenges for the future, Tribol. Int. 37 (7) (2004) 517–536.
[4] Y. Choi, et al., Tribological behavior of copper nanoparticles as additives in oil, Curr. Appl. Phys. 9 (2) (2009) e124–e127.
[5] S. Almasi, et al., A novel approach for bio-lubricant production from rapeseed oil-based biodiesel using ultrasound irradiation: multi-objective optimization, Sust. Energy Technol. Assess. 43 (2021) 100960.
[6] S. Boyde, Green lubricants. Environmental benefits and impacts of lubrication, Green Chem. 4 (4) (2002) 293–307.
[7] M.H. Esfe, et al., Experimental determination of thermal conductivity and dynamic viscosity of Ag–MgO/water hybrid nanofluid, Int. Commun. Heat Mass Transfer 66 (2015) 189–195.
[8] M.H. Esfe, S. Saedodin, M. Mahmoodi, Experimental studies on the convective heat transfer performance and thermophysical properties of MgO–water nanofluid under turbulent flow, Exp. Thermal Fluid Sci. 52 (2014) 68–78.
[9] G. Vakili-Nezhaad, A. Dorany, Investigation of the effect of multiwalled carbon nanotubes on the viscosity index of lube oil cuts, Chem. Eng. Commun. 196 (9) (2009) 997–1007.
[10] A. Rashidi, et al., Thermal and rheological properties of oil-based nanofluids from different carbon nanostructures, Int. Commun. Heat Mass Transfer 48 (2013) 178–182.
[11] M.H. Esfe, et al., Influence of different parameters on the rheological behavior of MWCNT (30%)-TiO2 (70%)/SAE50 hybrid nano-lubricant using response surface methodology and artificial neural network methods, Arab. J. Chem. 15 (12) (2022) 104285.
[12] M.H. Kashefi, S. Saedodin, S.H. Rostamian, Effect of silica nano-additive on flash point, pour point, rheological and tribological properties of lubricating engine oil: an experimental study, J. Therm. Anal. Calorim. 147 (6) (2022) 4073–4086.
[13] M. Sepehrnia, et al., Rheological behavior of engine oil-based hybrid nanofluid containing MWCNTs and ZnO nanopowders: experimental analysis, developing a novel correlation, and neural network modeling, Powder Technol. 404 (2022) 117492.
[14] R. Dinesh, P. Karuppasamy, S. Kalaiselvam, An experimental investigation and comprehensive modelling of thermal and rheological behaviour of graphene oxide nano platelets suspended mineral oil nano lubricant, J. Mol. Liq. 347 (2022) 118357.
[15] H. Qing, et al., A well-trained feed-forward perceptron artificial neural network (ANN) for predicting the dynamic viscosity of Al2O3–MWCNT (40:60)-oil SAE50 hybrid nano-lubricant at different volume fractions of nanoparticles, temperatures, and shear rates, Int. Commun. Heat Mass Transfer 128 (2021) 105624.
[16] A.K. Yadav, S. Chandel, Solar radiation prediction using artificial neural network techniques: a review, Renew. Sust. Energ. Rev. 33 (2014) 772–781.
[17] M. Baghoolizadeh, et al., Multi-objective optimization of annual electricity consumption and annual electricity production of a residential building using photovoltaic shadings, Int. J. Energy Res. (2025) 1–45.
[18] M. Rostamzadeh-Renani, et al., The effect of canard’s optimum geometric design on wake control behind the car using artificial neural network and genetic algorithm, ISA Trans. 131 (2022) 427–443.
[19] J. Wen, et al., Convolutional neural networks for classification of Alzheimer’s disease: overview and reproducible evaluation, Med. Image Anal. 63 (2020) 101694.
[20] T.J. Brinker, et al., Skin cancer classification using convolutional neural networks: systematic review, J. Med. Internet Res. 20 (10) (2018) e11936.
[21] K. Hyun, et al., Using an artificial neural network to patternize long-term fisheries data from South Korea, Aquat. Sci. 67 (3) (2005) 382–389.
[22] J. Kauffmann, et al., From clustering to cluster explanations via neural networks, IEEE Trans. Neural Netw. Learn. Syst. 35 (2) (2022) 1926–1941.
[23] A.A. Nahid, M.A. Mehrabi, Y. Kong, Histopathological breast cancer image classification by deep neural network techniques guided by local clustering, Biomed. Res. Int. (2018), https://doi.org/10.1155/2018/2362108.
[24] M. Baghoolizadeh, et al., A prediction model for CO2 concentration and multi-objective optimization of CO2 concentration and annual electricity consumption cost in residential buildings using ANN and GA, J. Clean. Prod. 379 (2) (2022) 134753.
[25] M. Rostamzadeh-Renani, et al., The effect of vortex generators on the hydrodynamic performance of a submarine at a high angle of attack using a multi-objective optimization and computational fluid dynamics, Ocean Eng. 282 (2023) 114932.
[26] S.J. Farlow, Self-Organizing Methods in Modeling GMDH Type Algorithms, Marcel Dekker, Inc., New York, 1984.
[27] M. Gumus, M.S. Kiran, Crude oil price forecasting using XGBoost, in: 2017 International Conference on Computer Science and Engineering (UBMK), IEEE, 2017.
[28] J. Chen, et al., Improved XGBoost model based on genetic algorithm, Int. J. Comput. Appl. Technol. 62 (3) (2020) 240–245.
[29] J.H. Friedman, Multivariate adaptive regression splines, Ann. Stat. 19 (1) (1991) 1–67.
[30] S. Milborrow, T. Hastie, R. Tibshirani, Earth: multivariate adaptive regression spline models, R Pack. Vers. 3 (7) (2014).
[31] N. Parveen, S. Zaidi, M. Danish, Support vector regression model for predicting the sorption capacity of lead (II), Perspect. Sci. 8 (2016) 629–631.
[32] V. Vapnik, S. Golowich, A. Smola, Support vector method for function approximation, regression estimation and signal processing, Adv. Neural Inf. Proces. Syst. 9 (1996).
[33] O. Abedinia, et al., Optimal offering and bidding strategies of renewable energy-based large consumer using a novel hybrid robust-stochastic approach, J. Clean. Prod. 215 (2019) 878–889.
[34] Z. Yang, et al., Robust multi-objective optimal design of islanded hybrid system with renewable and diesel sources/stationary and mobile energy storage systems, Renew. Sust. Energ. Rev. 148 (2021) 111295.
[35] M. Saeedi, et al., Robust optimization based optimal chiller loading under cooling demand uncertainty, Appl. Therm. Eng. 148 (2019) 1081–1091.
[36] J. Liu, et al., An IGDT-based risk-involved optimal bidding strategy for hydrogen storage-based intelligent parking lot of electric vehicles, J. Energy Stor. 27 (2020) 101057.
[37] M. Baghoolizadeh, et al., A multi-objective optimization of a building’s total heating and cooling loads and total costs in various climatic situations using response surface methodology, Energy Rep. 7 (2021) 7520–7538.
[38] M. Baghoolizadeh, et al., Multi-objective optimization of venetian blinds in office buildings to reduce electricity consumption and improve visual and thermal comfort by NSGA-II, Energ. Build. 278 (2022) 112639.
[39] M. Baghoolizadeh, et al., The effect of photovoltaic shading with ideal tilt angle on the energy cost optimization of a building model in European cities, Energy Sustain. Dev. 71 (2022) 505–516.
[40] M. Baghoolizadeh, et al., Optimization of annual electricity consumption costs and the costs of insulation and phase change materials in the residential building using artificial neural network and genetic algorithm methods, J. Energy Stor. 62 (2023) 106916.
[41] M. Baghoolizadeh, et al., Improving CO2 concentration, CO2 pollutant and occupants’ thermal comfort in a residential building using genetic algorithm optimization, Energ. Build. 291 (2023) 113109.
[42] K. Deb, et al., A fast and elitist multiobjective genetic algorithm: NSGA-II, IEEE Trans. Evol. Comput. 6 (2) (2002) 182–197.
[43] C. Maringanti, I. Chaubey, J. Popp, Development of a multiobjective optimization tool for the selection and placement of best management practices for nonpoint source pollution control, Water Resour. Res. 45 (6) (2009).
[44] C.A.C. Coello, G.B. Lamont, D.A. Van Veldhuizen, Evolutionary Algorithms for Solving Multi-Objective Problems 5, Springer, 2007.
[45] C.A.C. Coello, G.B. Lamont, Applications of Multi-Objective Evolutionary Algorithms 1, World Scientific, 2004.
[46] S. Mirjalili, S.M. Mirjalili, A. Lewis, Grey wolf optimizer, Adv. Eng. Softw. 69 (2014) 46–61.
[47] M.H. Esfe, S. Saedodin, An experimental investigation and new correlation of viscosity of ZnO–EG nanofluid at various temperatures and different solid volume fractions, Exp. Thermal Fluid Sci. 55 (2014) 1–5.
[48] K.E. Taylor, Summarizing multiple aspects of model performance in a single diagram, J. Geophys. Res. Atmos. 106 (D7) (2001) 7183–7192.

Permalink -

https://repository.canterbury.ac.uk/item/9q77q/using-evolutionary-algorithms-and-group-method-of-data-handling-ann-for-prediction-of-the-viscosity-mwcnt-zno-oil-sae-50-nano-lubricant

Restricted files

Accepted author manuscript

  • 0
    total views
  • 2
    total downloads
  • 0
    views this month
  • 2
    downloads this month

Export as

Related outputs

Cyber-physical system security for manufacturing industry 4.0 using LSTM-CNN parallel orchestration
Saeidlou, S., Ghadiminia, N. and Oti-Sarpong, K. 2025. Cyber-physical system security for manufacturing industry 4.0 using LSTM-CNN parallel orchestration. IEEE Access. https://doi.org/10.1109/ACCESS.2025.3525520
An inspiration for all time: Pioneer Verena Holmes' impact on future engineering practice
Saeidlou, S., Nortcliffe, A., Ghadiminia, N. and Ishaq, R. 2024. An inspiration for all time: Pioneer Verena Holmes' impact on future engineering practice. International Multidisciplinary Research Journal. 3, pp. 19-30. https://doi.org/10.47722/imrj.2001.33
Integrating AI into engineering education: Leveraging CDIO for enhanced assessment
Saeidlou, S., Nortcliffe, A., Ghadiminia, N. and Imam, A. 2024. Integrating AI into engineering education: Leveraging CDIO for enhanced assessment.
Practice-based engineering design for next-generation of engineers: A CDIO-based approach
Saeidlou, S., Ghadiminia, N., Nortcliffe, A. and Lambert, S. 2023. Practice-based engineering design for next-generation of engineers: A CDIO-based approach. in: The 19th CDIO International Conference: Proceedings - Full Papers
A digital approach to health and safety management on-site: A silver lining of the COVID-19 pandemic
Ghadiminia, N. and Saeidlou, S. 2023. A digital approach to health and safety management on-site: A silver lining of the COVID-19 pandemic. in: Manu, P., Cheung, C., Yunusa-Kaltungo, A., Emuze, F., Abreu Saurin, T. and Hadikusumo, B. (ed.) Construction Safety, Health and Well-being in the COVID-19 Era Routledge, Taylor and Francis.
A construction cost estimation framework using DNN and validation unit
Saeidlou, S. and Ghadiminia, N. 2023. A construction cost estimation framework using DNN and validation unit. Building Research & Information. 51 (3), pp. 241-368. https://doi.org/10.1080/09613218.2023.2196388
A hybrid clustering method based on the several diverse basic clustering and meta-clustering aggregation technique
Zhou, Bing, Lu, Bei and Saeidlou, Salman 2022. A hybrid clustering method based on the several diverse basic clustering and meta-clustering aggregation technique. Cybernetics and Systems. 55 (1), pp. 1-27. https://doi.org/10.1080/01969722.2022.2110682
Cybersecurity of smart buildings: a facilities management perspective
Ghadiminia, N. and Saeidlou, S. 2021. Cybersecurity of smart buildings: a facilities management perspective.
The legacy of Verena Holmes: inspiring next generation of engineers
Saeidlou, S., Ishaq, R., Nortcliffe, A. and Ghadiminia, N. 2021. The legacy of Verena Holmes: inspiring next generation of engineers.
Towards decentralised job shop scheduling as a web service
Saeidlou, S., Saadat, M. and Jules, G. D. 2021. Towards decentralised job shop scheduling as a web service. Cogent Engineering. 8 (1). https://doi.org/10.1080/23311916.2021.1938795
Ontology-based decision tree model for prediction in a manufacturing network
Khan, Z. M. A., Saeidlou, S. and Saadat, M. 2019. Ontology-based decision tree model for prediction in a manufacturing network. Production and Manufacturing Research. 7 (1), pp. 335-349. https://doi.org/10.1080/21693277.2019.1621228
Agent-based distributed manufacturing scheduling: an ontological approach
Saeidlou, S., Saadat, M., Sharifi, E. A. and Jules, G. D. 2019. Agent-based distributed manufacturing scheduling: an ontological approach. Cogent Engineering. 6 (1). https://doi.org/10.1080/23311916.2019.1565630
Knowledge and agent-based system for decentralised scheduling in manufacturing
Saeidlou, S., Saadat, M. and Jules, G. D. 2019. Knowledge and agent-based system for decentralised scheduling in manufacturing. Cogent Engineering. 6 (1). https://doi.org/10.1080/23311916.2019.1582309