Towards a cost-rffective simplified mechanical fuse: A feasibility study

Conference poster

Manna, S., Pope, V. J., Hassanin, H. and Wilshaw, M. A. 2025. Towards a cost-rffective simplified mechanical fuse: A feasibility study.
AuthorsManna, S., Pope, V. J., Hassanin, H. and Wilshaw, M. A.
TypeConference poster
Description

Conventional fuses rely on electrical and thermal overload to function, however, there is a gap in the market for a single-use mechanical fuse [1, 2] that fails under controlled shear force and is easy to actuate. This type of fuse can be used in switching circuits for braking systems. In this abstract, the mechanical formation of the fuse is explored along with a comparative analysis of structural material supported by finite element analysis (FEA). Physical testing of the fuse is evaluated using a custom rig breakage force, notch design, and actuator geometry. Results confirm the fuse's viability for applications requiring electrical safety and anti-tampering.

KeywordsMechanical fuse; FEA; Mechanical test rig
Year2025
ConferenceUK Society for Biomaterials Annual Conference
Related URLhttps://www.uksb.org.uk/uksb2025/
File
License
All rights reserved
File Access Level
Open
FunderInnovate UK
References

1) Pimenta, A.R. et al, 2020. Finite element analysis of a mechanical fuse failure. Journal of Failure Analysis and Prevention, 20, pp.370-375.
2) Leal-Junior, A.G. et al, 2022. Sensing applications of polymer optical fiber fuse. Advanced Photonics Research, 3(6), p.2100210.

Publication process dates
Deposited24 Jul 2025
Permalink -

https://repository.canterbury.ac.uk/item/9v817/towards-a-cost-rffective-simplified-mechanical-fuse-a-feasibility-study

Download files

File
UKSB Poster 2025 - Victoria Pope (CCCU).pdf
License: All rights reserved
File access level: Open

  • 403
    total views
  • 15
    total downloads
  • 13
    views this month
  • 3
    downloads this month

Export as

Related outputs

From concept to prototype: Designing an assistive device for multicompartmental knee osteoarthritis
Afzal, S. I., Manna, S. and Azhar, H. 2025. From concept to prototype: Designing an assistive device for multicompartmental knee osteoarthritis.
IoT-enabled headband for real-time concussion monitoring in amateur rugby
Manna, S., Azhar, H., Browne, T. C., O'Sullivan, E and Howells, K. 2025. IoT-enabled headband for real-time concussion monitoring in amateur rugby.
Tendon driven assistive hand for mirror based robotic therapy
Nabila Naz, Jasmine Hudson, Aidan Cahill, M. S. S. Malik, Md Nazmul Huda and Soumya Kanti Manna 2025. Tendon driven assistive hand for mirror based robotic therapy.
Morphing structural materials used in wind turbine blades
Riley, D., Chen, Y., Lu, C., Mohagheghian, I., Hassanin, H. and Sareh, P. 2025. Morphing structural materials used in wind turbine blades. Renewable and Sustainable Energy Reviews. 216. https://doi.org/10.1016/j.rser.2025.115618
Enhanced state of charge estimation through Cluster-Based Learning Model: Impact study on degradation and profitability of second-life electric vehicle batteries
Al-Alawi, M., Jaddoa, A., Cugley, J. and Hassanin, H. 2025. Enhanced state of charge estimation through Cluster-Based Learning Model: Impact study on degradation and profitability of second-life electric vehicle batteries. Journal of Energy Storage. 117, p. 116071. https://doi.org/10.1016/j.est.2025.116071
Zirconia-calcium silicate bioactive composites for dental applications using DLP additive manufacturing
Binobaid, A., De Lisi, M., Camilleri, J., Hassanin, H. and Essa, K. 2025. Zirconia-calcium silicate bioactive composites for dental applications using DLP additive manufacturing. Bioprinting. 45, p. e00377. https://doi.org/10.1016/j.bprint.2024.e00377
Multiple-choice questions reimagined: Exploring the ethical and pedagogical implications of GenAI for higher education
Malik, M., Shah, R., Zimbitas, G. and Manna, S. 2024. Multiple-choice questions reimagined: Exploring the ethical and pedagogical implications of GenAI for higher education. in: Fujita, T (ed.) Proceedings of the British Society for Research into Learning Mathematics 44(1) British Society for Research into Learning Mathematics.
Extracting optimal number of features for machine learning models in multilayer IoT attacks
Al Sukhni, B., Manna, S., Dave, J. and Zhang, L. 2024. Extracting optimal number of features for machine learning models in multilayer IoT attacks. Sensors. 24 (24), p. 8121. https://doi.org/10.3390/s24248121
Parkinson’s tremor suppression: A spring-based passive attenuator system
Kassim, A., Vasudevan, K., Azhar, H. and Manna, S. 2024. Parkinson’s tremor suppression: A spring-based passive attenuator system. in: 2024 International Conference on Intelligent Cybernetics Technology & Applications (ICICyTA) IEEE.
Study on agricultural waste utilization in sustainable particleboard production
Okeke, F., Ahmed, A. and Hassanin, H. 2024. Study on agricultural waste utilization in sustainable particleboard production. E3S Web of Conferences. 563. https://doi.org/10.1051/e3sconf/202456302007
Adaptive SOC Estimation for Lithium-Ion Batteries Using Cluster-Based Deep Learning Models Across Diverse Temperatures
Al-Alawi, Mohammed Khalifa, Cugley, James, Hassanin, Hany and Jaddoa, Ali 2024. Adaptive SOC Estimation for Lithium-Ion Batteries Using Cluster-Based Deep Learning Models Across Diverse Temperatures. 2024 IEEE International Conference on Environment and Electrical Engineering and 2024 IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe). https://doi.org/10.1109/eeeic/icpseurope61470.2024.10751169
A review of corncob-based building materials as a sustainable solution for the building and construction industry
Okeke, F., Ahmed, A., Imam, A. and Hassanin, H. 2024. A review of corncob-based building materials as a sustainable solution for the building and construction industry. Hybrid Advances. 6 (100269), pp. 1-16. https://doi.org/10.1016/j.hybadv.2024.100269
Impact of CDIO framework pedagogical approach adoption on the student learning and experience
Nortcliffe, A., Matei, G., Malik, M., Manna, S., Sheikholeslami, G. and James, H. 2024. Impact of CDIO framework pedagogical approach adoption on the student learning and experience.
Design of IoT-based smart energy meter for e-billing and prepaid electricity
Sinha, D., Bhrahmachary, S., Bhattacharya, S., Chaudhuri, N., Manna, S. and Bandyopadhyay, C. 2024. Design of IoT-based smart energy meter for e-billing and prepaid electricity. https://doi.org/10.1007/978-981-97-3485-6_22
Bio-inspired soft pneumatic gripper for agriculture harvesting
Clark, A., Goodsell-Carpenter, L., Buckow, P., Hewett, D., White, F., Imam, A., Naz, N., Robinson, B., Manna, S. and Ahmed, A. 2024. Bio-inspired soft pneumatic gripper for agriculture harvesting.
Bio-inspired soft pneumatic gripper for agriculture harvesting
Alex Clark, Liam Goodsell-Carpenter, Pia Buckow, Daniel Hewett, Francis White, Adil Imam, Nabila Naz, Breeshea Robinson, Soumaya K. Manna and Abdullahi Ahmed 2024. Bio-inspired soft pneumatic gripper for agriculture harvesting. in: M. Nazmul Huda, Mingfeng Wang and Tatiana Kalganova (ed.) Towards Autonomous Robotic Systems (TAROS 2024) Cham Springer. pp. 266-277
A novel enhanced SOC estimation method for lithium-ion battery cells using cluster-based LSTM models and centroid proximity selection
Al-Alawi, M., Jaddoa, A., Cugley, J. and Hassanin, H. 2024. A novel enhanced SOC estimation method for lithium-ion battery cells using cluster-based LSTM models and centroid proximity selection. Journal of Energy Storage. 97 (B), p. 112866. https://doi.org/10.1016/j.est.2024.112866
A qualitative review of educational robots for STEM: Technical features and impacts
Manna, Soumya Kanti, Azhar, M. A. Hannan Bin and Greace, Ann 2024. A qualitative review of educational robots for STEM: Technical features and impacts. in: Proceedings of the International Convention MIPRO IEEE.
Assessment of compressive strength performance of corn cob ash blended concrete: a review
Okeke, F., Ahmed, A., Imam, A. and Hassanin, H. 2024. Assessment of compressive strength performance of corn cob ash blended concrete: a review. https://doi.org/10.18552/2024/SCMT/606
Tailoring 3D star-shaped auxetic structures for enhanced mechanical performance
Hassanin, H., Wang, Y., A. Alsaleh, N., Djuansjah, J., El-Sayed, K. and Essa, K. 2024. Tailoring 3D star-shaped auxetic structures for enhanced mechanical performance. Aerospace. 11 (6), p. 428. https://doi.org/10.3390/aerospace11060428
Virtual prototyping of vision-based tactile sensors design for robotic-assisted precision machining
Zaid, I., Sajwani, H., Halwani, M., Hassanin, H., Ayyad, A., AbuAssi, A., Almaskari, F., Abdul Samad, Y, Abusafieh, A. and Zweiri, Y. 2024. Virtual prototyping of vision-based tactile sensors design for robotic-assisted precision machining. Sensors and Actuators A: Physical. 374 (115469). https://doi.org/10.1016/j.sna.2024.115469
Utilization of ChatGPT in CDIO projects to enhance the literacy of international students
Manna, S., Williams, S., Richmond-Fuller, A. and Nortcliffe, A. 2024. Utilization of ChatGPT in CDIO projects to enhance the literacy of international students.
Innovative assistive device to enhance wrist drop treatment in patients
Trainer, C., Manna, S. and Azhar, H. 2024. Innovative assistive device to enhance wrist drop treatment in patients. in: Costin, H-N., Magjarević, R. and Petroiu, G. G. (ed.) Advances in Digital Health and Medical Bioengineering: Proceedings of the 11th International Conference on E-Health and Bioengineering, EHB-2023, November 9–10, 2023, Bucharest, Romania – Volume 2: Health Technology Assessment, Biomedical Signal Processing, Medicine and Informatics Cham Springer. pp. 489-497
Tele-controlled upper arm exoskeleton for post-stroke recovery
Manna, S., Khan, A., Dilley, O. and Azhar, H. 2024. Tele-controlled upper arm exoskeleton for post-stroke recovery. in: Costin, H-N, Magjarević, R. and Petroiu, G. G. (ed.) Advances in Digital Health and Medical Bioengineering Cham Springer. pp. 478-488
Investigating security issues (multilayer attacks) on IoT devices using machine learning
Al Sukhni, B., Manna, S., Dave, J. and Zhang, L. 2024. Investigating security issues (multilayer attacks) on IoT devices using machine learning.
Designing lightweight 3D-printable bioinspired structures for enhanced compression and energy absorption properties
Harish, A., A. Alsaleh, N., Ahmadein, M., Elfar, A., Djuansjah, J., Hassanin, H., El-Sayed, M. and Essa, K. 2024. Designing lightweight 3D-printable bioinspired structures for enhanced compression and energy absorption properties. Polymers. 16 (6), p. 729. https://doi.org/10.3390/polym16060729
A novel vision-based multi-functional sensor for normality and position measurements in precise robotic manufacturing
Halwani, M., Ayyad, A., AbuAssi, L., Abdulrahman, Y., Almaskari, F., Hassanin, H., Abusafieh, A. and Zweiri, Y. 2024. A novel vision-based multi-functional sensor for normality and position measurements in precise robotic manufacturing. Precision Engineering. 88, pp. 367-381. https://doi.org/10.1016/j.precisioneng.2024.02.015
Optimisation of a novel hot air contactless single incremental point forming of polymers
Almadani, M., Guner, A., Hassanin, H. and Essa, K. 2024. Optimisation of a novel hot air contactless single incremental point forming of polymers. Journal of Manufacturing Processes. 117, pp. 302-314. https://doi.org/10.1016/j.jmapro.2024.02.042
Safeguarding IoMT: Semi-automated Intrusion Detection System (SAIDS) for detecting multilayer attacks
Al Sukhni, B., Manna, S., Dave, J. and Zhang, L. 2024. Safeguarding IoMT: Semi-automated Intrusion Detection System (SAIDS) for detecting multilayer attacks.
Advancing safety and efficiency in critical infrastructure with a novel SOC estimation for battery storage systems: A focus on second life batteries
Al-Alawi, M., Cugley, J., Jaddoa, A. and Hassanin, H. 2024. Advancing safety and efficiency in critical infrastructure with a novel SOC estimation for battery storage systems: A focus on second life batteries.
Review on engineering of bone scaffolds using conventional and additive manufacturing technologies
Mohammed, A., Jiménez, Amaia, Bidare, Prveen, Elshaer, Amr, Memic, Adnan, Hassanin, Hany and Essa, Khamis 2024. Review on engineering of bone scaffolds using conventional and additive manufacturing technologies. 3D Printing and Additive Manufacturing. 11 (4), pp. 1418-1440. https://doi.org/10.1089/3dp.2022.0360
An interactive web portal for customised telerehabilitation in neurological care
Hannan Bin Azhar, M A, Mészáros, Zoltán, Islam, Tasmina and Manna, Soumya K. 2023. An interactive web portal for customised telerehabilitation in neurological care. in: 2023 IEEE 22nd International Conference on Trust, Security and Privacy in Computing and Communications (TrustCom) IEEE. pp. 1814-1821
Exploring optimal set of features in machine learning for improving IoT multilayer security
Al Sukhni, B., Manna, S., Dave, J. and Zhang, Leishi 2023. Exploring optimal set of features in machine learning for improving IoT multilayer security. in: 2023 IEEE 9th World Forum on Internet of Things (WF-IoT 2023) IEEE.
Integration of graduate employability skills through industry outsourced CDIO project
Manna, S., Joyce, N. and Nortcliffe, A. 2023. Integration of graduate employability skills through industry outsourced CDIO project. in: Lyng, R., Bennedsen, J., Bettaied, L., Bodsberg, N. R., Edstrom, K., Guojonsdottir, M. S., Roslof, J., Solbjord, O. K. and Oien, G. (ed.) The 19th CDIO International Conference: Proceedings - Full Papers NTNU SEED. pp. 425-435
Contactless single point incremental forming: Experimental and numerical simulation
Almadani, M., Guner, A., Hassanin, H., De Lisi, Michele. and Essa, K. 2023. Contactless single point incremental forming: Experimental and numerical simulation. The International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-023-12401-1
Hot-air contactless single-point incremental forming
Almadani, M., Guner, A., Hassanin, H. and Essa, K. 2023. Hot-air contactless single-point incremental forming. Journal of Manufacturing and Materials Processing. 7 (5), p. 179. https://doi.org/10.3390/jmmp7050179
Optimising surface roughness and density in titanium fabrication via laser powder bed fusion
Hassanin, H., El-Sayed, M., Ahmadein, M., A. Alsaleh, N., Ataya, S., Ahmed, M. and Essa, K. 2023. Optimising surface roughness and density in titanium fabrication via laser powder bed fusion. Micromachines. 14 (8), p. 1642. https://doi.org/10.3390/mi14081642
Hybrid finite element–smoothed particle hydrodynamics modelling for optimizing cutting parameters in CFRP composites
Abena, A., Ataya, S., Hassanin, H., El-Sayed, M., Ahmadein, M., A. Alsaleh, N., Ahmed, M. and Essa, K. 2023. Hybrid finite element–smoothed particle hydrodynamics modelling for optimizing cutting parameters in CFRP composites. Polymers. 15 (13), p. 2789. https://doi.org/10.3390/polym15132789
Embracing sustainable farming: Unleashing the circular economy potential of second-life EV batteries in agricultural applications
Al-Alawi, M., Cugley, J. and Hassanin, H. 2023. Embracing sustainable farming: Unleashing the circular economy potential of second-life EV batteries in agricultural applications.
Entrained defects and mechanical properties of aluminium castings
El-Sayed, M., Essa, K. and Hassanin, H. 2023. Entrained defects and mechanical properties of aluminium castings.
Preparation of polylactic acid/calcium peroxide compo-site filaments for fused deposition modelling
Mohammed, A., Kovacev , N., Elshaer, A., Melaibari, A., Iqbal, J., Hassanin, H., Essa, K. and Memić, A. 2023. Preparation of polylactic acid/calcium peroxide compo-site filaments for fused deposition modelling. Polymers. 15 (9), p. 2229. https://doi.org/10.3390/polym15092229
Non-destructive disassembly of interference fit under wear conditions for sustainable remanufacturing
Yeung, H., Ataya, S., Hassanin, H., El-Sayed, M., Ahmadein, M., A. Alsaleh, N., Ahmed, M. and Essa, K. 2023. Non-destructive disassembly of interference fit under wear conditions for sustainable remanufacturing. Machines. 11 (5), p. 538. https://doi.org/10.3390/machines11050538
Fabrication and characterization of oxygen-generating polylactic acid/calcium peroxide composite filaments for bone scaffolds
Mohammed, A., Saeed, A., Elshaer, A., Melaibari, A., Memić, A., Hassanin, H. and Essa, K. 2023. Fabrication and characterization of oxygen-generating polylactic acid/calcium peroxide composite filaments for bone scaffolds. Pharmaceuticals. 16 (4), p. 627. https://doi.org/10.3390/ph16040627
Using second-life batteries and solar power to help farms become energy efficient.
Al-Alawi, M., Cugley, J. and Hassanin, H. 2023. Using second-life batteries and solar power to help farms become energy efficient. Canterbury Christ Church University.
Optimal locations and computational frameworks of FSR and IMU sensors for measuring gait abnormalities
Manna, S., Azhar, H. and Greace, A. 2023. Optimal locations and computational frameworks of FSR and IMU sensors for measuring gait abnormalities. Heliyon. 9 (4), p. e15210. https://doi.org/10.1016/j.heliyon.2023.e15210
Chip formation and orthogonal cutting optimisation of unidirectional carbon fibre composites
Hassanin, H., Abena, A., Soo, L., Ataya, S., El-Sayed, M., Ahmadein, M., A. Alsaleh, N., Ahmed, M. and Essa, K. 2023. Chip formation and orthogonal cutting optimisation of unidirectional carbon fibre composites. Polymers. 15 (8), p. 1897. https://doi.org/10.3390/polym15081897
Fabrication and Optimisation of Ti-6Al-4V Lattice-Structured Total Shoulder Implants Using Laser Additive Manufacturing
Bittredge, Oliver, Hassanin, H., El-Sayed, M., Eldessouky, Hossam Mohamed, A. Alsaleh, N., Alrasheedi, Nashmi H., Essa, K. and Ahmadein, M. 2022. Fabrication and Optimisation of Ti-6Al-4V Lattice-Structured Total Shoulder Implants Using Laser Additive Manufacturing. Materials (Basel, Switzerland). 15 (9), p. e3095. https://doi.org/10.3390/ma15093095
Machine learning-based solutions for securing IoT systems against multilayer attacks
Al Sukhni, B., Manna, S., Dave, J. and Zhang, L. 2022. Machine learning-based solutions for securing IoT systems against multilayer attacks. in: Singh Tomar, R., Verma, S., Kumar Chaurasia, B., Singh, V., Abawajy, J. H., Akashe, S., Hsiung, Pao-Ann and Prasad, R. (ed.) Communication, Networks and Computing Third International Conference, CNC 2022, Gwalior, India, December 8–10, 2022, Proceedings, Part I Cham Springer. pp. 140-153
Investigating the security issues of multi-layer IoT attacks using machine learning techniques
Al Sukhni, Badeea, Dave, Jugal M., Manna, Soumya K. and Zhang, Leishi 2022. Investigating the security issues of multi-layer IoT attacks using machine learning techniques. in: 2022 Human-Centered Cognitive Systems (HCCS) IEEE.
Elastomer-based visuotactile sensor for normality of robotic manufacturing systems
Hassanin, H., Zaid, I., Halwani, M., Ayyad, A., Imam, A., Almaskari, F. and Zweiri, Y. 2022. Elastomer-based visuotactile sensor for normality of robotic manufacturing systems. Polymers. 14 (23), p. 5097. https://doi.org/10.3390/polym14235097
Investigating the security issues of multi-layer IoMT attacks using machine learning techniques
Al Sukhni, B., Manna, S., Dave, J. and Zhang, L. 2022. Investigating the security issues of multi-layer IoMT attacks using machine learning techniques.
Techno-economic feasibility of retired electric-vehicle batteries repurpose/reuse in second-life applications: A systematic review
Hassanin, H., Al-Alawi, M. and Cugley, J. 2022. Techno-economic feasibility of retired electric-vehicle batteries repurpose/reuse in second-life applications: A systematic review. Energy and Climate Change. 3 (100086). https://doi.org/10.1016/j.egycc.2022.100086
Planning, operation, and design of market-based virtual power plant considering uncertainty
Hassanin, H., Ullah, Z., Arshad, Cugley, J. and Al-Alawi, M. 2022. Planning, operation, and design of market-based virtual power plant considering uncertainty. Energies. 19 (15), p. 7290. https://doi.org/10.3390/en15197290
Accuracy and repeatability study of an elbow exoskeleton for multistage exercises
Manna, Soumya K 2022. Accuracy and repeatability study of an elbow exoskeleton for multistage exercises. in: 2022 20th International Conference on Mechatronics - Mechatronika (ME) IEEE.
A smart and home-based telerehabilitation tool for patients with neuromuscular disorder
Manna, Soumya K., Hannan, M. A., Azhar, B., Smith, D. and Islam, T. 2022. A smart and home-based telerehabilitation tool for patients with neuromuscular disorder. IEEE. https://doi.org/10.1109/iecbes54088.2022.10079410
The epistemic insight digest: Issue : Autumn 2022
Gordon, A., Shalet, D., Simpson, S., Hassanin, H., Lawson, F., Lawson, M., Litchfield, A., Thomas, C., Canetta, E., Manley, K. and Choong, C. Shalet, D. (ed.) 2022. The epistemic insight digest: Issue : Autumn 2022. Canterbury Canterbury Christ Church University.
Modeling, optimization, and analysis of a virtual power plant demand response mechanism for the internal electricity market considering the uncertainty of renewable energy sources
Ullah, Z., Arshad and Hassanin, H. 2022. Modeling, optimization, and analysis of a virtual power plant demand response mechanism for the internal electricity market considering the uncertainty of renewable energy sources. Energies. 15 (14), p. 5296. https://doi.org/doi.org/10.3390/en15145296
Interdisciplinary engineering education - essential for the 21st century
Gordon, A., Simpson, S. and Hassanin, H. 2022. Interdisciplinary engineering education - essential for the 21st century.
Evaluation of students’ performance in CDIO projects through blended learning
Manna, S., Battikh, N., Nortcliffe, A. and Camm, J. 2022. Evaluation of students’ performance in CDIO projects through blended learning.
Multipoint forming using hole-type rubber punch
Hassanin, H., Tolipov, A., El-Sayed, M., Eldessouky, H., A. Alsaleh, N., Alfozan, A., Essa, K. and Ahmadein, M. 2022. Multipoint forming using hole-type rubber punch. Metals. 12 (3), p. 491. https://doi.org/10.3390/met12030491
Influence of bifilm defects generated during mould filling on the tensile properties of Al−Si−Mg cast alloys
El-Sayed, M., Essa, K. and Hassanin, H. 2022. Influence of bifilm defects generated during mould filling on the tensile properties of Al−Si−Mg cast alloys. Metals. 12 (1), p. e160. https://doi.org/10.3390/met12010160
A smart and secure IoMT tele-neurorehabilitation framework for post-stroke patients
Manna, S., Azhar, H. and Sakel, M. 2022. A smart and secure IoMT tele-neurorehabilitation framework for post-stroke patients. in: Bhaumik, S., Chattopadhyay, S., Chattopadhyay, T. and Bhattacharya, S. (ed.) Proceedings of International Conference on Industrial Instrumentation and Control ICI2C 2021 Singapore Springer. pp. 11-20
Multistage Tool Path Optimisation of Single-Point Incremental Forming Process
Yan, Zhou, Hassanin, H., El-Sayed, M., Eldessouky, Hossam Mohamed, Djuansjah, Joy Rizki Pangestu, A. Alsaleh, N., Essa, K. and Ahmadein, M. 2021. Multistage Tool Path Optimisation of Single-Point Incremental Forming Process. Materials (Basel, Switzerland). 14 (22), p. e6794. https://doi.org/10.3390/ma14226794
Enhancing hands-on skills under capstone CDIO project using blended learning approach
Manna, S., Battikh, N. and Camm, J. 2021. Enhancing hands-on skills under capstone CDIO project using blended learning approach . Sheffield
Effect of runner thickness and hydrogen content on the mechanical properties of A356 alloy castings
El-Sayed, M., Essa, K. and Hassanin, H. 2021. Effect of runner thickness and hydrogen content on the mechanical properties of A356 alloy castings . International Journal of Metalcasting. https://doi.org/10.1007/s40962-021-00753-x
Parts design and process optimization
Hassanin, Hany, Bidare, Prveen, Zweiri, Yahya and Essa, Khamis 2021. Parts design and process optimization. in: Salunkhe, S., Hussein, H. and Davim, J. (ed.) Applications of Artificial Intelligence in Additive Manufacturing USA IGI Global. pp. 25-49
An inclusive student-led online class test during the pandemic
Manna, S. and Azhar, H. 2021. An inclusive student-led online class test during the pandemic . Assessment and Feedback Symposium 2021.
Micro-additive manufacturing technologies of three-dimensional MEMS
Hassanin, H., Sheikholeslami, G., Pooya, S. and Ishaq, R. 2021. Micro-additive manufacturing technologies of three-dimensional MEMS . Advanced Engineering Materials. https://doi.org/10.1002/adem.202100422
Machine learning applied to the design and inspection of reinforced concrete bridges: Resilient methods and emerging applications
Fan , W., Chen, Y., Li, J., Sun, Y., Feng, F., Hassanin, H. and Sareh, P. 2021. Machine learning applied to the design and inspection of reinforced concrete bridges: Resilient methods and emerging applications. Structures. 33, pp. 3954-3963. https://doi.org/10.1016/j.istruc.2021.06.110
Porosity, cracks, and mechanical properties of additively manufactured tooling alloys: A review
Bidare, P., Jiménez, A., Hassanin, H. and Essa, K. 2021. Porosity, cracks, and mechanical properties of additively manufactured tooling alloys: A review. Advances in Manufacturing. https://doi.org/10.1007/s40436-021-00365-y
Laser powder bed fusion of Ti-6Al-2Sn-4Zr-6Mo alloy and properties prediction using deep learning approaches
Hassanin, H., Zweiri, Y., Finet, L., Essa, K., Qiu, C. and Attallah, M. 2021. Laser powder bed fusion of Ti-6Al-2Sn-4Zr-6Mo alloy and properties prediction using deep learning approaches. Materials. 14 (8), p. 2056. https://doi.org/10.3390/ma14082056
3DP printing of oral solid formulations: a systematic review
Brambilla, C., Okafor-Muo, O., Hassanin, H. and ElShaer, A. 2021. 3DP printing of oral solid formulations: a systematic review. Pharmaceutics. 13 (3), p. 358. https://doi.org/10.3390/pharmaceutics13030358
Powder-based laser hybrid additive manufacturing of metals: A review
Jimenez, A., Bidare, P., Hassanin, H., Tarlochan, F., Dimov, S. and Essa, K. 2021. Powder-based laser hybrid additive manufacturing of metals: A review. The International Journal of Advanced Manufacturing Technology. 114, pp. 63-96. https://doi.org/10.1007/s00170-021-06855-4
Adaptive and flexible online learning during Covid19 lockdown
Manna, S., Nortcliffe, A., Sheikholeslami, G. and Richmond-Fuller, A. 2021. Adaptive and flexible online learning during Covid19 lockdown.
Micro-fabrication of ceramics: additive manufacturing and conventional technologies
Hassanin, H., Essa, K., Elshaer, A., Imbaby, M. and El-Sayed, T. E. 2021. Micro-fabrication of ceramics: additive manufacturing and conventional technologies. Journal of Advanced Ceramics. 10, pp. 1-27. https://doi.org/10.1007/s40145-020-0422-5
Developing engineering growth mindset through CDIO outreach activities
Manna, S., Nortcliffe, A. and Sheikholeslami, G. 2020. Developing engineering growth mindset through CDIO outreach activities. in: Proceedings of the 16th International CDIO Conference Gothenburg, Sweden CDIO.
4D Printing of origami structures for minimally invasive surgeries using functional scaffold
Langford, T, Mohammed, A., Essa, K., Elshaer, A. and Hassanin, H. 2020. 4D Printing of origami structures for minimally invasive surgeries using functional scaffold. Applied Sciences. 11 (1), p. 332. https://doi.org/10.3390/app11010332
Reconfigurable multipoint forming using waffle-type elastic cushion and variable loading profile
Hassanin, H., Mohammed, M., Abdel-Wahab, A. and Essa, K 2020. Reconfigurable multipoint forming using waffle-type elastic cushion and variable loading profile. Materials.
3D printing of solid oral dosage forms: numerous challenges with unique opportunities
Hassanin, H. 2020. 3D printing of solid oral dosage forms: numerous challenges with unique opportunities. Journal of Pharmaceutical Sciences. https://doi.org/10.1016/j.xphs.2020.08.029
Design optimisation of additively manufactured titanium lattice structures for biomedical implants
El-Sayed, M.A., Essa, K., Ghazy, M. and Hassanin, H. 2020. Design optimisation of additively manufactured titanium lattice structures for biomedical implants. The International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-020-05982-8
4D Printing of NiTi auxetic structure with improved ballistic performance
Hassanin, H., Abena, A., Elsayed, M.A. and Essa, K. 2020. 4D Printing of NiTi auxetic structure with improved ballistic performance. Micromachines. 11 (8), p. 745. https://doi.org/doi.org/10.3390/mi11080745
Design of a game-based rehabilitation system using Kinect sensor
Manna, S. and Dubuy, V. N. 2019. Design of a game-based rehabilitation system using Kinect sensor. Minneapolis, MN, USA ASME.
Assessment of joint parameters in a Kinect sensor based rehabilitation game
Manna, S. and Dubey, V. N. 2019. Assessment of joint parameters in a Kinect sensor based rehabilitation game. Anaheim, California, USA ASME.
Rehabilitation strategy for post-stroke recovery using an innovative elbow exoskeleton
Manna, S. and Dubey, V. N. 2019. Rehabilitation strategy for post-stroke recovery using an innovative elbow exoskeleton. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 233 (6), pp. 668-680. https://doi.org/10.1177/0954411919847058
A portable elbow exoskeleton for three stages of rehabilitation
Manna, S. and Dubey, V. N. 2019. A portable elbow exoskeleton for three stages of rehabilitation. Journal of Mechanisms and Robotics. 11 (6), p. 065002. https://doi.org/10.1115/1.4044535