A review of corncob-based building materials as a sustainable solution for the building and construction industry

Journal article


Okeke, F., Ahmed, A., Imam, A. and Hassanin, H. 2024. A review of corncob-based building materials as a sustainable solution for the building and construction industry. Hybrid Advances. 6 (100269), pp. 1-16. https://doi.org/10.1016/j.hybadv.2024.100269
AuthorsOkeke, F., Ahmed, A., Imam, A. and Hassanin, H.
Abstract

The building and construction industry faces mounting pressure to adopt sustainable practices and materials due to its significant environmental impacts. Corncob (CC), a by-product of the corn industry, has shown great potential as a sustainable and versatile building material as contained in literature. Although no study has categorised the different repurposing applications of CC in building and construction. This systematic review investigates the potential of corncob, an abundant agricultural by-product, as a sustainable building material. Through analysis of 33 peer-reviewed studies from 2000 to 2023, it examined the diverse applications and evolving research trends of corncob in the building and construction industry. Key findings highlight corncob's global availability, low carbon footprint, and favourable properties for building applications. The review reveals nine distinct uses, including thermal/acoustic insulation, soil stabilization, fillers, cement replacement, aggregates, composite materials, particleboard production, and alkali-activated binders. Emerging research focuses on corncob ash as a supplementary cementitious material, with optimal cement replacement levels of 5–30 % by weight identified. Corncob-based materials demonstrate enhanced fire resistance, chemical durability, thermal insulation, and long-term strength development, though compressive strength remains a limitation for structural applications. The study concludes that corncob shows significant promise for advancing environmental sustainability in construction, particularly for non-structural and insulation applications. However, further research is needed to optimize material properties, standardize production methods, and evaluate full lifecycle impacts to enable widespread commercial adoption. This review provides a foundation for future investigations into innovative, low-carbon building materials derived from agricultural residues.

KeywordsCorncob; Sustainable material; Built environment; Waste; Building material
Year2024
JournalHybrid Advances
Journal citation6 (100269), pp. 1-16
PublisherElsevier
ISSN2773-207X
Digital Object Identifier (DOI)https://doi.org/10.1016/j.hybadv.2024.100269
Official URLhttps://www.sciencedirect.com/science/article/pii/S2773207X24001301
Publication dates
Print06 Aug 2024
Publication process dates
Accepted03 Aug 2024
Deposited02 Oct 2024
Publisher's version
License
File Access Level
Open
Output statusPublished
Permalink -

https://repository.canterbury.ac.uk/item/9934z/a-review-of-corncob-based-building-materials-as-a-sustainable-solution-for-the-building-and-construction-industry

Download files


Publisher's version
1-s2.0-S2773207X24001301-main.pdf
License: CC BY 4.0
File access level: Open

  • 61
    total views
  • 44
    total downloads
  • 23
    views this month
  • 16
    downloads this month

Export as

Related outputs

Evolving trends and challenges in sustainable architectural design; a practice perspective.
Mba, Emeka J., Okeke, Francis O., Igwe, Ajuluchukwu E., Ozigbo, Chinelo A., Oforji, Peter I. and Ozigbo, Ikechukwu W. 2024. Evolving trends and challenges in sustainable architectural design; a practice perspective. Heliyon. 10 (20), p. e39400. https://doi.org/10.1016/j.heliyon.2024.e39400
Bio-inspired soft pneumatic gripper for agriculture harvesting
Clark, A., Goodsell-Carpenter, L., Buckow, P., Hewett, D., White, F., Imam, A., Naz, N., Robinson, B., Manna, S. and Ahmed, A. 2024. Bio-inspired soft pneumatic gripper for agriculture harvesting.
Integrating AI into engineering education: Leveraging CDIO for enhanced assessment strategies
Nortcliffe, A., Saeidlou, S., Ghadiminia, N. and Imam, A. 2024. Integrating AI into engineering education: Leveraging CDIO for enhanced assessment strategies.
Innovating towards net-zero: Engineering solutions for climate resilience
Ahmed, A. 2024. Innovating towards net-zero: Engineering solutions for climate resilience.
Tailoring Poisson's ratio of a fabric using auextic structures
Robinson, B., Imam, A., Nortcliffe, A., Ahmed, A. and Sabir, T. 2024. Tailoring Poisson's ratio of a fabric using auextic structures.
The effect of 3D-printed auxetic structures on fabric Poisson's ratio
Robinson, B., Imam, A. and Di Domenico, A. 2024. The effect of 3D-printed auxetic structures on fabric Poisson's ratio. in: Mears, A., Forrester, S., Fleming, P., Grant, R. and Farmer, J. (ed.) ISEA 2024: The Engineering of Sport 15, Loughborough UK 8-11 July 2024: Conference Proceedings Loughborough ISEA. pp. 170-171
A novel enhanced SOC estimation method for lithium-ion battery cells using cluster-based LSTM models and centroid proximity selection
Al-Alawi, M., Jaddoa, A., Cugley, J. and Hassanin, H. 2024. A novel enhanced SOC estimation method for lithium-ion battery cells using cluster-based LSTM models and centroid proximity selection. Journal of Energy Storage. 97 (B), p. 112866. https://doi.org/10.1016/j.est.2024.112866
Assessment of compressive strength performance of corn cob ash blended concrete: a review
Okeke, F., Ahmed, A., Imam, A. and Hassanin, H. 2024. Assessment of compressive strength performance of corn cob ash blended concrete: a review. https://doi.org/10.18552/2024/SCMT/606
Tailoring 3D star-shaped auxetic structures for enhanced mechanical performance
Hassanin, H., Wang, Y., A. Alsaleh, N., Djuansjah, J., El-Sayed, K. and Essa, K. 2024. Tailoring 3D star-shaped auxetic structures for enhanced mechanical performance. Aerospace. 11 (6), p. 428. https://doi.org/10.3390/aerospace11060428
Virtual prototyping of vision-based tactile sensors design for robotic-assisted precision machining
Zaid, I., Sajwani, H., Halwani, M., Hassanin, H., Ayyad, A., AbuAssi, A., Almaskari, F., Abdul Samad, Y, Abusafieh, A. and Zweiri, Y. 2024. Virtual prototyping of vision-based tactile sensors design for robotic-assisted precision machining. Sensors and Actuators A: Physical. 374 (115469). https://doi.org/10.1016/j.sna.2024.115469
Designing lightweight 3D-printable bioinspired structures for enhanced compression and energy absorption properties
Harish, A., A. Alsaleh, N., Ahmadein, M., Elfar, A., Djuansjah, J., Hassanin, H., El-Sayed, M. and Essa, K. 2024. Designing lightweight 3D-printable bioinspired structures for enhanced compression and energy absorption properties. Polymers. 16 (6), p. 729. https://doi.org/10.3390/polym16060729
A novel vision-based multi-functional sensor for normality and position measurements in precise robotic manufacturing
Halwani, M., Ayyad, A., AbuAssi, L., Abdulrahman, Y., Almaskari, F., Hassanin, H., Abusafieh, A. and Zweiri, Y. 2024. A novel vision-based multi-functional sensor for normality and position measurements in precise robotic manufacturing. Precision Engineering. 88, pp. 367-381. https://doi.org/10.1016/j.precisioneng.2024.02.015
Optimisation of a novel hot air contactless single incremental point forming of polymers
Almadani, M., Guner, A., Hassanin, H. and Essa, K. 2024. Optimisation of a novel hot air contactless single incremental point forming of polymers. Journal of Manufacturing Processes. 117, pp. 302-314. https://doi.org/10.1016/j.jmapro.2024.02.042
Advancing safety and efficiency in critical infrastructure with a novel SOC estimation for battery storage systems: A focus on second life batteries
Al-Alawi, M., Cugley, J., Jaddoa, A. and Hassanin, H. 2024. Advancing safety and efficiency in critical infrastructure with a novel SOC estimation for battery storage systems: A focus on second life batteries.
Review on engineering of bone scaffolds using conventional and additive manufacturing technologies
Mohammed, A., Jiménez, Amaia, Bidare, Prveen, Elshaer, Amr, Memic, Adnan, Hassanin, Hany and Essa, Khamis 2024. Review on engineering of bone scaffolds using conventional and additive manufacturing technologies. 3D Printing and Additive Manufacturing. 11 (4), pp. 1418-1440. https://doi.org/10.1089/3dp.2022.0360
Engineering learning of sustainable product lifecycle through CDIO
Nortcliffe, A., Imam, A. and Joyce, N. 2023. Engineering learning of sustainable product lifecycle through CDIO.
Experimental investigation of earth-air ventilation system in low-energy buildings
Ahmed, A. 2023. Experimental investigation of earth-air ventilation system in low-energy buildings.
Awareness of the effects of small-scale cassava mill effluent on the environment in Ika North East Local Government Area, Delta State, Nigeria.
Isimah, Matthew Ogorchukwu, Chukwurah, Gladys Ogochukwu, Okeke, Francis, Nwankwo, Cletus Famous and Nnoli, Chukwuemeka Ifedilichukwu 2023. Awareness of the effects of small-scale cassava mill effluent on the environment in Ika North East Local Government Area, Delta State, Nigeria. Environmental Monitoring and Assessment. 195 (12), p. 1431. https://doi.org/10.1007/s10661-023-12026-7
Post occupancy evaluation of ventilation coefficient desired for thermal comfort in educational facilities
Mba, E.J, Okeke, F.O, Ezema, E.O, Oforji, P.I and Ozigbo, C.A 2023. Post occupancy evaluation of ventilation coefficient desired for thermal comfort in educational facilities. Journal of Human, Earth, and Future. 4 (1), pp. 88-102. https://doi.org/10.28991/HEF-2023-04-01-07
Architectural design response to population issue in sub-Saharan cities
Okeke, F.O, Ezema, E.C, Nnaemeka-Okeke, R.C, Okosun, E.A and Okeke, C.A 2023. Architectural design response to population issue in sub-Saharan cities. E3S Web of Conferences. 434 (02005). https://doi.org/10.1051/e3sconf/202343402005
Contactless single point incremental forming: Experimental and numerical simulation
Almadani, M., Guner, A., Hassanin, H., De Lisi, Michele. and Essa, K. 2023. Contactless single point incremental forming: Experimental and numerical simulation. The International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-023-12401-1
Hot-air contactless single-point incremental forming
Almadani, M., Guner, A., Hassanin, H. and Essa, K. 2023. Hot-air contactless single-point incremental forming. Journal of Manufacturing and Materials Processing. 7 (5), p. 179. https://doi.org/10.3390/jmmp7050179
Optimising surface roughness and density in titanium fabrication via laser powder bed fusion
Hassanin, H., El-Sayed, M., Ahmadein, M., A. Alsaleh, N., Ataya, S., Ahmed, M. and Essa, K. 2023. Optimising surface roughness and density in titanium fabrication via laser powder bed fusion. Micromachines. 14 (8), p. 1642. https://doi.org/10.3390/mi14081642
Transit, walking and cycling infrastructure and sustainable development in Enugu city, Nigeria.
Andrew E. Okosun, Francis O Okeke, Ajuluchukwu E. Igwe and Emmanuel C. Ezema 2023. Transit, walking and cycling infrastructure and sustainable development in Enugu city, Nigeria. IOP Conference Series: Earth and Environmental Science. 1239 (012022), pp. 1-14. https://doi.org/10.1088/1755-1315/1239/1/012022
The effects of rhythm on building openings and fenestrations on airflow pattern in tropical low-rise residential buildings
Peter I. Oforji, Emeka J. Mba and Francis O. Okeke 2023. The effects of rhythm on building openings and fenestrations on airflow pattern in tropical low-rise residential buildings. civil engineering journal. 9 (8), pp. 2062-2084. https://doi.org/10.28991/CEJ-2023-09-08-016
Hybrid finite element–smoothed particle hydrodynamics modelling for optimizing cutting parameters in CFRP composites
Abena, A., Ataya, S., Hassanin, H., El-Sayed, M., Ahmadein, M., A. Alsaleh, N., Ahmed, M. and Essa, K. 2023. Hybrid finite element–smoothed particle hydrodynamics modelling for optimizing cutting parameters in CFRP composites. Polymers. 15 (13), p. 2789. https://doi.org/10.3390/polym15132789
Embracing sustainable farming: Unleashing the circular economy potential of second-life EV batteries in agricultural applications
Al-Alawi, M., Cugley, J. and Hassanin, H. 2023. Embracing sustainable farming: Unleashing the circular economy potential of second-life EV batteries in agricultural applications.
Entrained defects and mechanical properties of aluminium castings
El-Sayed, M., Essa, K. and Hassanin, H. 2023. Entrained defects and mechanical properties of aluminium castings.
Preparation of polylactic acid/calcium peroxide compo-site filaments for fused deposition modelling
Mohammed, A., Kovacev , N., Elshaer, A., Melaibari, A., Iqbal, J., Hassanin, H., Essa, K. and Memić, A. 2023. Preparation of polylactic acid/calcium peroxide compo-site filaments for fused deposition modelling. Polymers. 15 (9), p. 2229. https://doi.org/10.3390/polym15092229
Non-destructive disassembly of interference fit under wear conditions for sustainable remanufacturing
Yeung, H., Ataya, S., Hassanin, H., El-Sayed, M., Ahmadein, M., A. Alsaleh, N., Ahmed, M. and Essa, K. 2023. Non-destructive disassembly of interference fit under wear conditions for sustainable remanufacturing. Machines. 11 (5), p. 538. https://doi.org/10.3390/machines11050538
Fabrication and characterization of oxygen-generating polylactic acid/calcium peroxide composite filaments for bone scaffolds
Mohammed, A., Saeed, A., Elshaer, A., Melaibari, A., Memić, A., Hassanin, H. and Essa, K. 2023. Fabrication and characterization of oxygen-generating polylactic acid/calcium peroxide composite filaments for bone scaffolds. Pharmaceuticals. 16 (4), p. 627. https://doi.org/10.3390/ph16040627
Using second-life batteries and solar power to help farms become energy efficient.
Al-Alawi, M., Cugley, J. and Hassanin, H. 2023. Using second-life batteries and solar power to help farms become energy efficient. Canterbury Christ Church University.
Chip formation and orthogonal cutting optimisation of unidirectional carbon fibre composites
Hassanin, H., Abena, A., Soo, L., Ataya, S., El-Sayed, M., Ahmadein, M., A. Alsaleh, N., Ahmed, M. and Essa, K. 2023. Chip formation and orthogonal cutting optimisation of unidirectional carbon fibre composites. Polymers. 15 (8), p. 1897. https://doi.org/10.3390/polym15081897
Finite element model to simulate impact on a soft tissue simulant
Imam, S.A., Hughes, A.C., Carre, M.J., Driscoll,H., Winwood,K., Venkatraman,P. and Allen, T 2023. Finite element model to simulate impact on a soft tissue simulant. Sports Engineering. https://doi.org/10.1007/s12283-023-00407-7
Fabrication and Optimisation of Ti-6Al-4V Lattice-Structured Total Shoulder Implants Using Laser Additive Manufacturing
Bittredge, Oliver, Hassanin, H., El-Sayed, M., Eldessouky, Hossam Mohamed, A. Alsaleh, N., Alrasheedi, Nashmi H., Essa, K. and Ahmadein, M. 2022. Fabrication and Optimisation of Ti-6Al-4V Lattice-Structured Total Shoulder Implants Using Laser Additive Manufacturing. Materials (Basel, Switzerland). 15 (9), p. e3095. https://doi.org/10.3390/ma15093095
Assessing the ability of padded clothing to prevent stud Iinduced injuries in Rugby Union
Hughes, A., Driscoll, H., Imam, S. A., Allen, T. and Carre, M.J. 2022. Assessing the ability of padded clothing to prevent stud Iinduced injuries in Rugby Union. https://doi.org/10.5703/1288284317516
Validation of a finite element model of a shoulder surrogate for accessing paddings in Rugby Union
Syed Adil Imam, Heather Driscoll, Keith Winwood, Prabhuraj Venkatraman and Tom Allen 2022. Validation of a finite element model of a shoulder surrogate for accessing paddings in Rugby Union. https://doi.org/10.5703/1288284317515
Elastomer-based visuotactile sensor for normality of robotic manufacturing systems
Hassanin, H., Zaid, I., Halwani, M., Ayyad, A., Imam, A., Almaskari, F. and Zweiri, Y. 2022. Elastomer-based visuotactile sensor for normality of robotic manufacturing systems. Polymers. 14 (23), p. 5097. https://doi.org/10.3390/polym14235097
Techno-economic feasibility of retired electric-vehicle batteries repurpose/reuse in second-life applications: A systematic review
Hassanin, H., Al-Alawi, M. and Cugley, J. 2022. Techno-economic feasibility of retired electric-vehicle batteries repurpose/reuse in second-life applications: A systematic review. Energy and Climate Change. 3 (100086). https://doi.org/10.1016/j.egycc.2022.100086
Planning, operation, and design of market-based virtual power plant considering uncertainty
Hassanin, H., Ullah, Z., Arshad, Cugley, J. and Al-Alawi, M. 2022. Planning, operation, and design of market-based virtual power plant considering uncertainty. Energies. 19 (15), p. 7290. https://doi.org/10.3390/en15197290
The epistemic insight digest: Issue : Autumn 2022
Gordon, A., Shalet, D., Simpson, S., Hassanin, H., Lawson, F., Lawson, M., Litchfield, A., Thomas, C., Canetta, E., Manley, K. and Choong, C. Shalet, D. (ed.) 2022. The epistemic insight digest: Issue : Autumn 2022. Canterbury Canterbury Christ Church University.
Modeling, optimization, and analysis of a virtual power plant demand response mechanism for the internal electricity market considering the uncertainty of renewable energy sources
Ullah, Z., Arshad and Hassanin, H. 2022. Modeling, optimization, and analysis of a virtual power plant demand response mechanism for the internal electricity market considering the uncertainty of renewable energy sources. Energies. 15 (14), p. 5296. https://doi.org/doi.org/10.3390/en15145296
Interdisciplinary engineering education - essential for the 21st century
Gordon, A., Simpson, S. and Hassanin, H. 2022. Interdisciplinary engineering education - essential for the 21st century.
Applying heritage building information modelling (HBIM) to lost heritage in conflict Z: Al-Hadba’ Minaret in Mosul, Iraq
Al-Muqdadi, F and Ahmed, A. 2022. Applying heritage building information modelling (HBIM) to lost heritage in conflict Z: Al-Hadba’ Minaret in Mosul, Iraq. https://doi.org/10.5194/isprs-archives-XLIII-B2-2022-753-2022
Energy-saving potential prediction models for large-scale building: A state-of-the-art review
Yang, X., Liu, S., Zou, Yuliang, Ji, W., Ahmed, A., Zhange, Q., Han, X., Shen, Y. and Zhang, S. 2022. Energy-saving potential prediction models for large-scale building: A state-of-the-art review. Renewable and Sustainable Energy Reviews. 156. https://doi.org/10.1016/j.rser.2021.111992
Multipoint forming using hole-type rubber punch
Hassanin, H., Tolipov, A., El-Sayed, M., Eldessouky, H., A. Alsaleh, N., Alfozan, A., Essa, K. and Ahmadein, M. 2022. Multipoint forming using hole-type rubber punch. Metals. 12 (3), p. 491. https://doi.org/10.3390/met12030491
Influence of bifilm defects generated during mould filling on the tensile properties of Al−Si−Mg cast alloys
El-Sayed, M., Essa, K. and Hassanin, H. 2022. Influence of bifilm defects generated during mould filling on the tensile properties of Al−Si−Mg cast alloys. Metals. 12 (1), p. e160. https://doi.org/10.3390/met12010160
Multistage Tool Path Optimisation of Single-Point Incremental Forming Process
Yan, Zhou, Hassanin, H., El-Sayed, M., Eldessouky, Hossam Mohamed, Djuansjah, Joy Rizki Pangestu, A. Alsaleh, N., Essa, K. and Ahmadein, M. 2021. Multistage Tool Path Optimisation of Single-Point Incremental Forming Process. Materials (Basel, Switzerland). 14 (22), p. e6794. https://doi.org/10.3390/ma14226794
Integrated performance optimization of higher education buildings using low-energy renovation process and user engagement
Ahmed, A., Mateo-Garcia, M., Arewa, O. A. and Caratella, K. 2021. Integrated performance optimization of higher education buildings using low-energy renovation process and user engagement. Energies. 14 (5). https://doi.org/10.3390/en14051475
Fire safety in high-rise buildings: Is the stay-put tactic a misjudgement or magnificent strategy?
Andrew Oyen Arewa, Abdullahi Ahmed, David J. Edwards and Chizaram Nwankwo 2021. Fire safety in high-rise buildings: Is the stay-put tactic a misjudgement or magnificent strategy? Buildings. 11 (339), pp. 2-16. https://doi.org/10.3390/buildings11080339
Effect of runner thickness and hydrogen content on the mechanical properties of A356 alloy castings
El-Sayed, M., Essa, K. and Hassanin, H. 2021. Effect of runner thickness and hydrogen content on the mechanical properties of A356 alloy castings . International Journal of Metalcasting. https://doi.org/10.1007/s40962-021-00753-x
Parts design and process optimization
Hassanin, Hany, Bidare, Prveen, Zweiri, Yahya and Essa, Khamis 2021. Parts design and process optimization. in: Salunkhe, S., Hussein, H. and Davim, J. (ed.) Applications of Artificial Intelligence in Additive Manufacturing USA IGI Global. pp. 25-49
Micro-additive manufacturing technologies of three-dimensional MEMS
Hassanin, H., Sheikholeslami, G., Pooya, S. and Ishaq, R. 2021. Micro-additive manufacturing technologies of three-dimensional MEMS . Advanced Engineering Materials. https://doi.org/10.1002/adem.202100422
Machine learning applied to the design and inspection of reinforced concrete bridges: Resilient methods and emerging applications
Fan , W., Chen, Y., Li, J., Sun, Y., Feng, F., Hassanin, H. and Sareh, P. 2021. Machine learning applied to the design and inspection of reinforced concrete bridges: Resilient methods and emerging applications. Structures. 33, pp. 3954-3963. https://doi.org/10.1016/j.istruc.2021.06.110
Porosity, cracks, and mechanical properties of additively manufactured tooling alloys: A review
Bidare, P., Jiménez, A., Hassanin, H. and Essa, K. 2021. Porosity, cracks, and mechanical properties of additively manufactured tooling alloys: A review. Advances in Manufacturing. https://doi.org/10.1007/s40436-021-00365-y
Laser powder bed fusion of Ti-6Al-2Sn-4Zr-6Mo alloy and properties prediction using deep learning approaches
Hassanin, H., Zweiri, Y., Finet, L., Essa, K., Qiu, C. and Attallah, M. 2021. Laser powder bed fusion of Ti-6Al-2Sn-4Zr-6Mo alloy and properties prediction using deep learning approaches. Materials. 14 (8), p. 2056. https://doi.org/10.3390/ma14082056
3DP printing of oral solid formulations: a systematic review
Brambilla, C., Okafor-Muo, O., Hassanin, H. and ElShaer, A. 2021. 3DP printing of oral solid formulations: a systematic review. Pharmaceutics. 13 (3), p. 358. https://doi.org/10.3390/pharmaceutics13030358
Powder-based laser hybrid additive manufacturing of metals: A review
Hassanin, H. 2021. Powder-based laser hybrid additive manufacturing of metals: A review. The International Journal of Advanced Manufacturing Technology.
Micro-fabrication of ceramics: additive manufacturing and conventional technologies
Hassanin, H., Essa, K., Elshaer, A., Imbaby, M. and El-Sayed, T. E. 2021. Micro-fabrication of ceramics: additive manufacturing and conventional technologies. Journal of Advanced Ceramics. 10, pp. 1-27. https://doi.org/10.1007/s40145-020-0422-5
An 80-year projection of net zero energy buildings (nZEB) strategies in extreme climatic conditions of Iraq
Ahmed, A. 2020. An 80-year projection of net zero energy buildings (nZEB) strategies in extreme climatic conditions of Iraq. International Journal of Building Pathology and Adaptation. 38 (3), pp. 472-492. https://doi.org/10.1108/IJBPA-02-2019-0014
4D Printing of origami structures for minimally invasive surgeries using functional scaffold
Langford, T, Mohammed, A., Essa, K., Elshaer, A. and Hassanin, H. 2020. 4D Printing of origami structures for minimally invasive surgeries using functional scaffold. Applied Sciences. 11 (1), p. 332. https://doi.org/10.3390/app11010332
Reconfigurable multipoint forming using waffle-type elastic cushion and variable loading profile
Hassanin, H., Mohammed, M., Abdel-Wahab, A. and Essa, K 2020. Reconfigurable multipoint forming using waffle-type elastic cushion and variable loading profile. Materials.
3D printing of solid oral dosage forms: numerous challenges with unique opportunities
Hassanin, H. 2020. 3D printing of solid oral dosage forms: numerous challenges with unique opportunities. Journal of Pharmaceutical Sciences. https://doi.org/10.1016/j.xphs.2020.08.029
Design optimisation of additively manufactured titanium lattice structures for biomedical implants
El-Sayed, M.A., Essa, K., Ghazy, M. and Hassanin, H. 2020. Design optimisation of additively manufactured titanium lattice structures for biomedical implants. The International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-020-05982-8
4D Printing of NiTi auxetic structure with improved ballistic performance
Hassanin, H., Abena, A., Elsayed, M.A. and Essa, K. 2020. 4D Printing of NiTi auxetic structure with improved ballistic performance. Micromachines. 11 (8), p. 745. https://doi.org/doi.org/10.3390/mi11080745