Assessment of compressive strength performance of corn cob ash blended concrete: a review

Conference paper


Okeke, F., Ahmed, A., Imam, A. and Hassanin, H. 2024. Assessment of compressive strength performance of corn cob ash blended concrete: a review. https://doi.org/10.18552/2024/SCMT/606
AuthorsOkeke, F., Ahmed, A., Imam, A. and Hassanin, H.
TypeConference paper
Description

The construction industry continuously seeks innovative materials to enhance sustainability and performance. Successful adoption, however, hinges on reliable performance data. Corncob ash (CCA) has been proposed to partially replace ordinary Portland cement (OPC) in concrete, yet varying results in compressive strength (CS) hinder widespread use. This systematic review analyzed experimental articles from 2010-2023, evaluating CS of OPC and CCA blended concrete at a 28-day curing period. It examined the relationship between compressive strength and CCA replacement percentage. Out of 23 studies (9.74% of the total), 60.9% reported lower CS in CCA blended concrete (6%-35.8% reduction). However, 17.4% demonstrated increased CS (3.6%-18.4% rise) with higher CCA replacement. Linear regression analysis yielded p<0.05, indicating significant potential for CCA to enhance concrete
compressive strength. Conclusively, an optimum 6.86% CCA substitution in concrete without optimization maintains structural integrity and promotes sustainable practices
in the industry.

KeywordsCorncob ash; Concrete; Compressive strength; Ordinary Portland cement; Replacement
Year2024
Conference Sixth International Conference onSustainable Construction Materials and Technologies
Digital Object Identifier (DOI)https://doi.org/10.18552/2024/SCMT/606
File
License
All rights reserved
File Access Level
Open
Book titleProceedings of Sixth International Conference on Sustainable Construction Materials and Technologies (SCMT6)
Web address (URL) of conference proceedingshttps://www.scmt-conferences.com/proceedings
References

REFERENCES
Abdul-Manan, D. (2016) 'Exploring the Potential of Alternative Pozzolona Cement for the
Northern Savannah Ecological Zone in Ghana', American Journal of Civil Engineering,
4(3), pp. 74-79. doi: 10.11648/j.ajce.20160403.12.
Adesanya, D. A. and Raheem, A. A. (2009) 'Development of corn cob ash blended cement',
Construction and Building Materials, 23(1), pp. 347-352.
Adesina, A. (2020) 'Recent advances in the concrete industry to reduce its carbon dioxide
emissions', Environmental Challenges, 1(100004). doi: 10.1016/j.envc.2020.100004.
Ahangba, A. and Michael, T. (2016) 'Partial replacement of cement with corn cob ash',
International Journal for innovative research in multidisciplinary field, 2(7), pp. 158–
169.
Anierobi, C. M., Okeke, F. O., Efobi, K. O., Nwalusi, D. M., John-Nsa, C., and Ibekwe, J.
(2022) 'Waste-to-wealth Activities of Scavengers: A Panacea to the Environmental
Impact of Global Climate Change in Enugu Metropolis, Nigeria', IOP Conference
Series: Earth and Environmental Science, 1054(1), 012051. doi: 10.1088/1755-
1315/1054/1/012051.
Anjaneyulu, K. (2017) 'Partial replacement of cement concrete by waste Materials',
International Journal of Engineering Development and Research, 5(2), pp. 1374-1383.
Anon (2021) 'Concrete needs to lose its colossal carbon footprint', Nature, 597(7878), 593-594.
Aprianti, S. E. (2017) 'A huge number of artificial waste material can be supplementary
cementitious material (SCM) for concrete production – a review part II', Journal of
Cleaner Production, 142, pp. 4178-4194. doi: 10.1016/j.jclepro.2015.12.115.
Asadollahfardi, G., Delnavaz, M., Rashnoiee, V., and Ghonabadi, N. (2016) 'Use of treated
domestic wastewater before chlorination to produce and cure concrete', Construction
and Building Materials, 105, pp. 253-261. doi: 10.1016/j.conbuildmat.2015.12.039.
Bala, A., Aminulai, H. O., Abubakar, M., Abdulrahman, H. S., and Musa, U. (2015) 'Partial
replacement of cement with corn cob ash in concrete production', Federal University of
Technology, Minna, Nigeria, Technical Note. Available online at:
repository.futminna.edu.ng (accessed on 28/1/2023).
Eisa, A. (2014) 'Properties of Concrete Incorporating Recycled Post-Consumer Environmental
Wastes', International Journal of Concrete Structures and Materials, 8(3), pp. 251–258.
Ettu, L. O., Anya, U. C., Arimanwa, J. I., Anyaogu, L., and Nwachukwu, K. C. (2013) 'Strength
of Binary Blended Cement Composites Containing Corn Cob Ash', International Journal
of Engineering Research and Development, 6(10), pp. 77-82.
Falagas, M. E., Pitsouni, E. I., Malietzis, G. A., & Pappas, G. (2008) 'Comparison of PubMed,
Scopus, web of science, and Google scholar: strengths and weaknesses', The FASEB
journal, 22(2), pp. 338-342.
Gag, C. R. (2014). Cement and concrete as an engineering material: An historic appraisal and
case study analysis. Engineering Failure Analysis, 40, 114-140.
doi:10.1016/j.engfailanal.2014.02.004
González, M. J & Navarro, G, J (2006) 'Assessment of the decrease of CO2 emissions in the
construction field through the selection of materials: Practical case study of three houses
of low environmental impact', Building and Environment, 41(7), pp. 902-909.
Gradinaru, C.M., Barbuta, M., Babor, D., Serbanoiu, A.A. (2018) 'Corn Cob Ash as sustainable
puzzolanic material for an ecological concrete', Bulletin of the Transilvania University
of Brasov, Series I: Engineering Sciences, 11(60), pp. 61-66.
Green, S. (2005) 'Systematic review and meta-analysis', Singap. Med. J., 46(6), pp. 270–274.
Hammond, G.P., Jones, C.I., (2008) 'Embodied energy and carbon in construction materials',
Proc. Inst. Civ. Eng. Energy doi:10.1680/ener.2008.161.2.87.
International Energy Agency (IEA) (2014) 'Energy Technology Perspectives 2015: Mobilising
Innovation to Accelerate Climate Action'.
International Energy Agency (IEA). (2018) 'Technology Roadmap Low-Carbon Transition in
the Cement Industry', Technical Report; World Business Council for Sustainable
Development and International Energy: Geneva, Switzerland.
Keerthi Gowda, B.S.K. and Dakshayini, M.S., (2020) 'Application of FOSM and Chebyshev’s
Theorem Concept to Predict Compressive Strength Attributes of Corncob Ash
Embedded Cement Concrete', Computational Engineering and Physical Modeling, 3(1),
pp. 16–24.
Kumari, S., Chander, D., & Walia, R. (2018) 'Durability and strength analysis of concrete by
partial replacement of cement with corn cob ash and rice husk ash', International Journal
of Research in Advent Technology, 6(7), pp. 1593-1601.
Madlool, N. A., Saidur, R., Hossain, M. S., & Rahim, N. A. (2011) 'A critical review on energy
use and savings in the cement industries', Renewable and Sustainable Energy Reviews,
15(4).
Malhotra, V.M., (2010) 'Global warming, and role of supplementary cementing materials and
superplasticisers in reducing greenhouse gas emissions from the manufacturing of
Portland cement', International Journal of Structural Engineering, 1(2), pp. 116–130.
Martirena, F., & Monzó, J. (2018) 'Vegetable ashes as supplementary cementitious materials',
Cem. Concr. Res., 114, pp. 57–64.
Mba, E. J., Okeke, F. O., Ezema, E. O., Oforji, P. I., & Ozigbo, C. A. (2023) 'Post occupancy
evaluation of ventilation coefficient desired for thermal comfort in educational
facilities', Journal of Human, Earth, and Future, 4(1), pp. 88-102.
Naganathan, S., Silvadanan, S., Chung, T. Y., Nicolasselvam, M. F., & Thiruchelvam, S.
(2014) 'Use of Wastes in Developing Mortar – A Review', Advanced Materials
Research, 935.
Nwalusi, D.M., Obi, N.I., Chendo, I.G., & Okeke, F.O. (2022). 'Climate responsive design
strategies for contemporary low-rise residential buildings in tropical environment of
Enugu, Nigeria', IOP Conference Series: Earth and Environmental Science, 1054(1),
012052.
Okeke, F. O., Ezema, E. C., Nnaemeka-Okeke, R. C., Okosun, A. E., & Okeke, C. A. (2023)
'Architectural design response to population issue in sub-Saharan cities', E3S Web of
Conferences, 434, 02005. https://doi.org/10.1051/e3sconf/202343402005.
Okeke, F.O., Ahmed, A., Imam, A. and Hassanin, H. (2023) 'A systematic review of corncobbased building materials as a sustainable solution for the building and construction
industry', Poster presentation at Engineering professors Congress 12 - 14 June 2023,
Hereford Uk.
Okosun, A. E., Okeke, F. O., Igwe, A. E., & Ezema, E. C. (2023) 'Transit, walking and cycling
infrastructure and sustainable development in Enugu city, Nigeria', IOP Conference
Series: Earth and Environmental Science, 1239(1), 012022.
Olafusi, O. S., & Olutoge, F. A. (2012) 'Strength properties of corn cob ash concrete', Journal
of Emerging Trends in Engineering and Applied Sciences, 3(2), pp. 297-301.
Olafusi, O. S., Kupolati, W. K., Sadiku, E. R., Snyman, J., & Ndambuki, J. M. (2018)
'Characterization of Corncob Ash (CCA) as a Pozzolanic Material', International Journal
of Civil Engineering and Technology, 9(12), pp. 1016–1024.
Olonade, K. A., Jaji, M. B., & Adekitan, O. A. (2017) 'Experimental comparison of selected
pozzolanic materials', African Journal of Science, Technology, Innovation and
Development, 9(4), pp. 381-385. DOI: 10.1080/20421338.2017.1327931.
Oluborode, K.D., & Olofintuyi, I.O. (2015) 'Strength evaluation of CCA in a blended Portland
cement', International journal of engineering and innovative technology, 4(12), pp. 14-
17.
Olukotun A, Audu M, T, Obafaye B J, Abiodun, E. O. (2019) 'Partial replacement of cement
with corn cob ash – a review', Global scientific journal, 7(11), pp. 82-87.
Patel, M., Rathod, J., Bhatt, P., Chaudhari, D., Pathan, N., & Naik, S. (2020) 'Experimental
Study of CCA Concrete', International journal of innovative research in technology,
6(11), 110-112.
Price, A., Yeargin, R., Fini, E., & Abu-Lebdeh, T. (2014) 'Investigating effects of introduction
of corncob ash into portland cements concrete: Mechanical and thermal properties',
American Journal of Engineering and Applied Sciences, 7(1), pp. 137-148.
Schmidt, W. et al. (2021) 'Sustainable circular value chains: From rural waste to feasible urban
construction materials solutions', Development and the Built Environment, 6, p. 100047.
Selina R.G, Dinesh.S, Bharath R.P, and Kishorenandha.S (2020) 'Assessment on Influence of
Corncob Ash as a Partial Replacement of Cement in Concrete', International Journal of
Innovative Technology and Exploring Engineering, 9(8), pp. 210-212.
Șerbănoiu, A. A., Grădinaru, C. M., Muntean, R., Cimpoeșu, N., & Șerbănoiu, B. V. (2022)
'Corn Cob Ash versus Sunflower Stalk Ash, Two Sustainable Raw Materials in an
Analysis of Their Effects on the Concrete Properties', Materials, 15(3), 868.
Shafigh, P., Mahmud, H. B., Jumaat, M. Z., & Zargar, M. (2014) 'Agricultural wastes as
aggregate in concrete mixtures–A review', Construction and Building Materials, 53, pp.
110-117
Shakouri, M., Exstrom, C. L., Ramanathan, S., & Suraneni, P. (2020) 'Hydration, strength, and
durability of cementitious materials incorporating untreated corn cob ash', Construction
and building materials, 243, 118171.
https://doi.org/10.1016/j.conbuildmat.2020.118171.
Singh, K., Singh, J., & Kumar, S. (2017) 'A sustainable environmental study on corn cob ash
subjected to elevated temperature', Current World Environment, 13(1), pp. 144-150.
Sintayehu, A., & Mamaru, D. (2019) 'Production of Lightweight Concrete Using Corncob Ash
as replacement of cement in concrete', American journal of civil engineering, 7(1), pp.
17-20.
Suwanmaneechot, P., Nochaiya, T., & Julphunthong, P. (2015) 'Improvement, characterization
and use of waste corn cob ash in cement-based materials', IOP Conf. Series: Materials
Science and Engineering, 103 (012023) doi:10.1088/1757-899X/103/1/012023.
World Cities Report (WCR) (2022) 'Envisaging the Future of Cities', United Nations Human
Settlements Programme (UN-Habitat) Nairobi, Kenya, pp. 1-382

Publication process dates
Deposited04 Sep 2024
Permalink -

https://repository.canterbury.ac.uk/item/98372/assessment-of-compressive-strength-performance-of-corn-cob-ash-blended-concrete-a-review

Download files


File
606.pdf
License: All rights reserved
File access level: Open

  • 57
    total views
  • 40
    total downloads
  • 22
    views this month
  • 9
    downloads this month

Export as

Related outputs

Evolving trends and challenges in sustainable architectural design; a practice perspective.
Mba, Emeka J., Okeke, Francis O., Igwe, Ajuluchukwu E., Ozigbo, Chinelo A., Oforji, Peter I. and Ozigbo, Ikechukwu W. 2024. Evolving trends and challenges in sustainable architectural design; a practice perspective. Heliyon. 10 (20), p. e39400. https://doi.org/10.1016/j.heliyon.2024.e39400
A review of corncob-based building materials as a sustainable solution for the building and construction industry
Okeke, F., Ahmed, A., Imam, A. and Hassanin, H. 2024. A review of corncob-based building materials as a sustainable solution for the building and construction industry. Hybrid Advances. 6 (100269), pp. 1-16. https://doi.org/10.1016/j.hybadv.2024.100269
Bio-inspired soft pneumatic gripper for agriculture harvesting
Clark, A., Goodsell-Carpenter, L., Buckow, P., Hewett, D., White, F., Imam, A., Naz, N., Robinson, B., Manna, S. and Ahmed, A. 2024. Bio-inspired soft pneumatic gripper for agriculture harvesting.
Integrating AI into engineering education: Leveraging CDIO for enhanced assessment strategies
Nortcliffe, A., Saeidlou, S., Ghadiminia, N. and Imam, A. 2024. Integrating AI into engineering education: Leveraging CDIO for enhanced assessment strategies.
Innovating towards net-zero: Engineering solutions for climate resilience
Ahmed, A. 2024. Innovating towards net-zero: Engineering solutions for climate resilience.
Tailoring Poisson's ratio of a fabric using auextic structures
Robinson, B., Imam, A., Nortcliffe, A., Ahmed, A. and Sabir, T. 2024. Tailoring Poisson's ratio of a fabric using auextic structures.
The effect of 3D-printed auxetic structures on fabric Poisson's ratio
Robinson, B., Imam, A. and Di Domenico, A. 2024. The effect of 3D-printed auxetic structures on fabric Poisson's ratio. in: Mears, A., Forrester, S., Fleming, P., Grant, R. and Farmer, J. (ed.) ISEA 2024: The Engineering of Sport 15, Loughborough UK 8-11 July 2024: Conference Proceedings Loughborough ISEA. pp. 170-171
A novel enhanced SOC estimation method for lithium-ion battery cells using cluster-based LSTM models and centroid proximity selection
Al-Alawi, M., Jaddoa, A., Cugley, J. and Hassanin, H. 2024. A novel enhanced SOC estimation method for lithium-ion battery cells using cluster-based LSTM models and centroid proximity selection. Journal of Energy Storage. 97 (B), p. 112866. https://doi.org/10.1016/j.est.2024.112866
Tailoring 3D star-shaped auxetic structures for enhanced mechanical performance
Hassanin, H., Wang, Y., A. Alsaleh, N., Djuansjah, J., El-Sayed, K. and Essa, K. 2024. Tailoring 3D star-shaped auxetic structures for enhanced mechanical performance. Aerospace. 11 (6), p. 428. https://doi.org/10.3390/aerospace11060428
Virtual prototyping of vision-based tactile sensors design for robotic-assisted precision machining
Zaid, I., Sajwani, H., Halwani, M., Hassanin, H., Ayyad, A., AbuAssi, A., Almaskari, F., Abdul Samad, Y, Abusafieh, A. and Zweiri, Y. 2024. Virtual prototyping of vision-based tactile sensors design for robotic-assisted precision machining. Sensors and Actuators A: Physical. 374 (115469). https://doi.org/10.1016/j.sna.2024.115469
Designing lightweight 3D-printable bioinspired structures for enhanced compression and energy absorption properties
Harish, A., A. Alsaleh, N., Ahmadein, M., Elfar, A., Djuansjah, J., Hassanin, H., El-Sayed, M. and Essa, K. 2024. Designing lightweight 3D-printable bioinspired structures for enhanced compression and energy absorption properties. Polymers. 16 (6), p. 729. https://doi.org/10.3390/polym16060729
A novel vision-based multi-functional sensor for normality and position measurements in precise robotic manufacturing
Halwani, M., Ayyad, A., AbuAssi, L., Abdulrahman, Y., Almaskari, F., Hassanin, H., Abusafieh, A. and Zweiri, Y. 2024. A novel vision-based multi-functional sensor for normality and position measurements in precise robotic manufacturing. Precision Engineering. 88, pp. 367-381. https://doi.org/10.1016/j.precisioneng.2024.02.015
Optimisation of a novel hot air contactless single incremental point forming of polymers
Almadani, M., Guner, A., Hassanin, H. and Essa, K. 2024. Optimisation of a novel hot air contactless single incremental point forming of polymers. Journal of Manufacturing Processes. 117, pp. 302-314. https://doi.org/10.1016/j.jmapro.2024.02.042
Advancing safety and efficiency in critical infrastructure with a novel SOC estimation for battery storage systems: A focus on second life batteries
Al-Alawi, M., Cugley, J., Jaddoa, A. and Hassanin, H. 2024. Advancing safety and efficiency in critical infrastructure with a novel SOC estimation for battery storage systems: A focus on second life batteries.
Review on engineering of bone scaffolds using conventional and additive manufacturing technologies
Mohammed, A., Jiménez, Amaia, Bidare, Prveen, Elshaer, Amr, Memic, Adnan, Hassanin, Hany and Essa, Khamis 2024. Review on engineering of bone scaffolds using conventional and additive manufacturing technologies. 3D Printing and Additive Manufacturing. 11 (4), pp. 1418-1440. https://doi.org/10.1089/3dp.2022.0360
Engineering learning of sustainable product lifecycle through CDIO
Nortcliffe, A., Imam, A. and Joyce, N. 2023. Engineering learning of sustainable product lifecycle through CDIO.
Experimental investigation of earth-air ventilation system in low-energy buildings
Ahmed, A. 2023. Experimental investigation of earth-air ventilation system in low-energy buildings.
Awareness of the effects of small-scale cassava mill effluent on the environment in Ika North East Local Government Area, Delta State, Nigeria.
Isimah, Matthew Ogorchukwu, Chukwurah, Gladys Ogochukwu, Okeke, Francis, Nwankwo, Cletus Famous and Nnoli, Chukwuemeka Ifedilichukwu 2023. Awareness of the effects of small-scale cassava mill effluent on the environment in Ika North East Local Government Area, Delta State, Nigeria. Environmental Monitoring and Assessment. 195 (12), p. 1431. https://doi.org/10.1007/s10661-023-12026-7
Post occupancy evaluation of ventilation coefficient desired for thermal comfort in educational facilities
Mba, E.J, Okeke, F.O, Ezema, E.O, Oforji, P.I and Ozigbo, C.A 2023. Post occupancy evaluation of ventilation coefficient desired for thermal comfort in educational facilities. Journal of Human, Earth, and Future. 4 (1), pp. 88-102. https://doi.org/10.28991/HEF-2023-04-01-07
Architectural design response to population issue in sub-Saharan cities
Okeke, F.O, Ezema, E.C, Nnaemeka-Okeke, R.C, Okosun, E.A and Okeke, C.A 2023. Architectural design response to population issue in sub-Saharan cities. E3S Web of Conferences. 434 (02005). https://doi.org/10.1051/e3sconf/202343402005
Contactless single point incremental forming: Experimental and numerical simulation
Almadani, M., Guner, A., Hassanin, H., De Lisi, Michele. and Essa, K. 2023. Contactless single point incremental forming: Experimental and numerical simulation. The International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-023-12401-1
Hot-air contactless single-point incremental forming
Almadani, M., Guner, A., Hassanin, H. and Essa, K. 2023. Hot-air contactless single-point incremental forming. Journal of Manufacturing and Materials Processing. 7 (5), p. 179. https://doi.org/10.3390/jmmp7050179
Optimising surface roughness and density in titanium fabrication via laser powder bed fusion
Hassanin, H., El-Sayed, M., Ahmadein, M., A. Alsaleh, N., Ataya, S., Ahmed, M. and Essa, K. 2023. Optimising surface roughness and density in titanium fabrication via laser powder bed fusion. Micromachines. 14 (8), p. 1642. https://doi.org/10.3390/mi14081642
Transit, walking and cycling infrastructure and sustainable development in Enugu city, Nigeria.
Andrew E. Okosun, Francis O Okeke, Ajuluchukwu E. Igwe and Emmanuel C. Ezema 2023. Transit, walking and cycling infrastructure and sustainable development in Enugu city, Nigeria. IOP Conference Series: Earth and Environmental Science. 1239 (012022), pp. 1-14. https://doi.org/10.1088/1755-1315/1239/1/012022
The effects of rhythm on building openings and fenestrations on airflow pattern in tropical low-rise residential buildings
Peter I. Oforji, Emeka J. Mba and Francis O. Okeke 2023. The effects of rhythm on building openings and fenestrations on airflow pattern in tropical low-rise residential buildings. civil engineering journal. 9 (8), pp. 2062-2084. https://doi.org/10.28991/CEJ-2023-09-08-016
Hybrid finite element–smoothed particle hydrodynamics modelling for optimizing cutting parameters in CFRP composites
Abena, A., Ataya, S., Hassanin, H., El-Sayed, M., Ahmadein, M., A. Alsaleh, N., Ahmed, M. and Essa, K. 2023. Hybrid finite element–smoothed particle hydrodynamics modelling for optimizing cutting parameters in CFRP composites. Polymers. 15 (13), p. 2789. https://doi.org/10.3390/polym15132789
Embracing sustainable farming: Unleashing the circular economy potential of second-life EV batteries in agricultural applications
Al-Alawi, M., Cugley, J. and Hassanin, H. 2023. Embracing sustainable farming: Unleashing the circular economy potential of second-life EV batteries in agricultural applications.
Entrained defects and mechanical properties of aluminium castings
El-Sayed, M., Essa, K. and Hassanin, H. 2023. Entrained defects and mechanical properties of aluminium castings.
Preparation of polylactic acid/calcium peroxide compo-site filaments for fused deposition modelling
Mohammed, A., Kovacev , N., Elshaer, A., Melaibari, A., Iqbal, J., Hassanin, H., Essa, K. and Memić, A. 2023. Preparation of polylactic acid/calcium peroxide compo-site filaments for fused deposition modelling. Polymers. 15 (9), p. 2229. https://doi.org/10.3390/polym15092229
Non-destructive disassembly of interference fit under wear conditions for sustainable remanufacturing
Yeung, H., Ataya, S., Hassanin, H., El-Sayed, M., Ahmadein, M., A. Alsaleh, N., Ahmed, M. and Essa, K. 2023. Non-destructive disassembly of interference fit under wear conditions for sustainable remanufacturing. Machines. 11 (5), p. 538. https://doi.org/10.3390/machines11050538
Fabrication and characterization of oxygen-generating polylactic acid/calcium peroxide composite filaments for bone scaffolds
Mohammed, A., Saeed, A., Elshaer, A., Melaibari, A., Memić, A., Hassanin, H. and Essa, K. 2023. Fabrication and characterization of oxygen-generating polylactic acid/calcium peroxide composite filaments for bone scaffolds. Pharmaceuticals. 16 (4), p. 627. https://doi.org/10.3390/ph16040627
Using second-life batteries and solar power to help farms become energy efficient.
Al-Alawi, M., Cugley, J. and Hassanin, H. 2023. Using second-life batteries and solar power to help farms become energy efficient. Canterbury Christ Church University.
Chip formation and orthogonal cutting optimisation of unidirectional carbon fibre composites
Hassanin, H., Abena, A., Soo, L., Ataya, S., El-Sayed, M., Ahmadein, M., A. Alsaleh, N., Ahmed, M. and Essa, K. 2023. Chip formation and orthogonal cutting optimisation of unidirectional carbon fibre composites. Polymers. 15 (8), p. 1897. https://doi.org/10.3390/polym15081897
Finite element model to simulate impact on a soft tissue simulant
Imam, S.A., Hughes, A.C., Carre, M.J., Driscoll,H., Winwood,K., Venkatraman,P. and Allen, T 2023. Finite element model to simulate impact on a soft tissue simulant. Sports Engineering. https://doi.org/10.1007/s12283-023-00407-7
Fabrication and Optimisation of Ti-6Al-4V Lattice-Structured Total Shoulder Implants Using Laser Additive Manufacturing
Bittredge, Oliver, Hassanin, H., El-Sayed, M., Eldessouky, Hossam Mohamed, A. Alsaleh, N., Alrasheedi, Nashmi H., Essa, K. and Ahmadein, M. 2022. Fabrication and Optimisation of Ti-6Al-4V Lattice-Structured Total Shoulder Implants Using Laser Additive Manufacturing. Materials (Basel, Switzerland). 15 (9), p. e3095. https://doi.org/10.3390/ma15093095
Assessing the ability of padded clothing to prevent stud Iinduced injuries in Rugby Union
Hughes, A., Driscoll, H., Imam, S. A., Allen, T. and Carre, M.J. 2022. Assessing the ability of padded clothing to prevent stud Iinduced injuries in Rugby Union. https://doi.org/10.5703/1288284317516
Validation of a finite element model of a shoulder surrogate for accessing paddings in Rugby Union
Syed Adil Imam, Heather Driscoll, Keith Winwood, Prabhuraj Venkatraman and Tom Allen 2022. Validation of a finite element model of a shoulder surrogate for accessing paddings in Rugby Union. https://doi.org/10.5703/1288284317515
Elastomer-based visuotactile sensor for normality of robotic manufacturing systems
Hassanin, H., Zaid, I., Halwani, M., Ayyad, A., Imam, A., Almaskari, F. and Zweiri, Y. 2022. Elastomer-based visuotactile sensor for normality of robotic manufacturing systems. Polymers. 14 (23), p. 5097. https://doi.org/10.3390/polym14235097
Techno-economic feasibility of retired electric-vehicle batteries repurpose/reuse in second-life applications: A systematic review
Hassanin, H., Al-Alawi, M. and Cugley, J. 2022. Techno-economic feasibility of retired electric-vehicle batteries repurpose/reuse in second-life applications: A systematic review. Energy and Climate Change. 3 (100086). https://doi.org/10.1016/j.egycc.2022.100086
Planning, operation, and design of market-based virtual power plant considering uncertainty
Hassanin, H., Ullah, Z., Arshad, Cugley, J. and Al-Alawi, M. 2022. Planning, operation, and design of market-based virtual power plant considering uncertainty. Energies. 19 (15), p. 7290. https://doi.org/10.3390/en15197290
The epistemic insight digest: Issue : Autumn 2022
Gordon, A., Shalet, D., Simpson, S., Hassanin, H., Lawson, F., Lawson, M., Litchfield, A., Thomas, C., Canetta, E., Manley, K. and Choong, C. Shalet, D. (ed.) 2022. The epistemic insight digest: Issue : Autumn 2022. Canterbury Canterbury Christ Church University.
Modeling, optimization, and analysis of a virtual power plant demand response mechanism for the internal electricity market considering the uncertainty of renewable energy sources
Ullah, Z., Arshad and Hassanin, H. 2022. Modeling, optimization, and analysis of a virtual power plant demand response mechanism for the internal electricity market considering the uncertainty of renewable energy sources. Energies. 15 (14), p. 5296. https://doi.org/doi.org/10.3390/en15145296
Interdisciplinary engineering education - essential for the 21st century
Gordon, A., Simpson, S. and Hassanin, H. 2022. Interdisciplinary engineering education - essential for the 21st century.
Applying heritage building information modelling (HBIM) to lost heritage in conflict Z: Al-Hadba’ Minaret in Mosul, Iraq
Al-Muqdadi, F and Ahmed, A. 2022. Applying heritage building information modelling (HBIM) to lost heritage in conflict Z: Al-Hadba’ Minaret in Mosul, Iraq. https://doi.org/10.5194/isprs-archives-XLIII-B2-2022-753-2022
Energy-saving potential prediction models for large-scale building: A state-of-the-art review
Yang, X., Liu, S., Zou, Yuliang, Ji, W., Ahmed, A., Zhange, Q., Han, X., Shen, Y. and Zhang, S. 2022. Energy-saving potential prediction models for large-scale building: A state-of-the-art review. Renewable and Sustainable Energy Reviews. 156. https://doi.org/10.1016/j.rser.2021.111992
Multipoint forming using hole-type rubber punch
Hassanin, H., Tolipov, A., El-Sayed, M., Eldessouky, H., A. Alsaleh, N., Alfozan, A., Essa, K. and Ahmadein, M. 2022. Multipoint forming using hole-type rubber punch. Metals. 12 (3), p. 491. https://doi.org/10.3390/met12030491
Influence of bifilm defects generated during mould filling on the tensile properties of Al−Si−Mg cast alloys
El-Sayed, M., Essa, K. and Hassanin, H. 2022. Influence of bifilm defects generated during mould filling on the tensile properties of Al−Si−Mg cast alloys. Metals. 12 (1), p. e160. https://doi.org/10.3390/met12010160
Multistage Tool Path Optimisation of Single-Point Incremental Forming Process
Yan, Zhou, Hassanin, H., El-Sayed, M., Eldessouky, Hossam Mohamed, Djuansjah, Joy Rizki Pangestu, A. Alsaleh, N., Essa, K. and Ahmadein, M. 2021. Multistage Tool Path Optimisation of Single-Point Incremental Forming Process. Materials (Basel, Switzerland). 14 (22), p. e6794. https://doi.org/10.3390/ma14226794
Integrated performance optimization of higher education buildings using low-energy renovation process and user engagement
Ahmed, A., Mateo-Garcia, M., Arewa, O. A. and Caratella, K. 2021. Integrated performance optimization of higher education buildings using low-energy renovation process and user engagement. Energies. 14 (5). https://doi.org/10.3390/en14051475
Fire safety in high-rise buildings: Is the stay-put tactic a misjudgement or magnificent strategy?
Andrew Oyen Arewa, Abdullahi Ahmed, David J. Edwards and Chizaram Nwankwo 2021. Fire safety in high-rise buildings: Is the stay-put tactic a misjudgement or magnificent strategy? Buildings. 11 (339), pp. 2-16. https://doi.org/10.3390/buildings11080339
Effect of runner thickness and hydrogen content on the mechanical properties of A356 alloy castings
El-Sayed, M., Essa, K. and Hassanin, H. 2021. Effect of runner thickness and hydrogen content on the mechanical properties of A356 alloy castings . International Journal of Metalcasting. https://doi.org/10.1007/s40962-021-00753-x
Parts design and process optimization
Hassanin, Hany, Bidare, Prveen, Zweiri, Yahya and Essa, Khamis 2021. Parts design and process optimization. in: Salunkhe, S., Hussein, H. and Davim, J. (ed.) Applications of Artificial Intelligence in Additive Manufacturing USA IGI Global. pp. 25-49
Micro-additive manufacturing technologies of three-dimensional MEMS
Hassanin, H., Sheikholeslami, G., Pooya, S. and Ishaq, R. 2021. Micro-additive manufacturing technologies of three-dimensional MEMS . Advanced Engineering Materials. https://doi.org/10.1002/adem.202100422
Machine learning applied to the design and inspection of reinforced concrete bridges: Resilient methods and emerging applications
Fan , W., Chen, Y., Li, J., Sun, Y., Feng, F., Hassanin, H. and Sareh, P. 2021. Machine learning applied to the design and inspection of reinforced concrete bridges: Resilient methods and emerging applications. Structures. 33, pp. 3954-3963. https://doi.org/10.1016/j.istruc.2021.06.110
Porosity, cracks, and mechanical properties of additively manufactured tooling alloys: A review
Bidare, P., Jiménez, A., Hassanin, H. and Essa, K. 2021. Porosity, cracks, and mechanical properties of additively manufactured tooling alloys: A review. Advances in Manufacturing. https://doi.org/10.1007/s40436-021-00365-y
Laser powder bed fusion of Ti-6Al-2Sn-4Zr-6Mo alloy and properties prediction using deep learning approaches
Hassanin, H., Zweiri, Y., Finet, L., Essa, K., Qiu, C. and Attallah, M. 2021. Laser powder bed fusion of Ti-6Al-2Sn-4Zr-6Mo alloy and properties prediction using deep learning approaches. Materials. 14 (8), p. 2056. https://doi.org/10.3390/ma14082056
3DP printing of oral solid formulations: a systematic review
Brambilla, C., Okafor-Muo, O., Hassanin, H. and ElShaer, A. 2021. 3DP printing of oral solid formulations: a systematic review. Pharmaceutics. 13 (3), p. 358. https://doi.org/10.3390/pharmaceutics13030358
Powder-based laser hybrid additive manufacturing of metals: A review
Hassanin, H. 2021. Powder-based laser hybrid additive manufacturing of metals: A review. The International Journal of Advanced Manufacturing Technology.
Micro-fabrication of ceramics: additive manufacturing and conventional technologies
Hassanin, H., Essa, K., Elshaer, A., Imbaby, M. and El-Sayed, T. E. 2021. Micro-fabrication of ceramics: additive manufacturing and conventional technologies. Journal of Advanced Ceramics. 10, pp. 1-27. https://doi.org/10.1007/s40145-020-0422-5
An 80-year projection of net zero energy buildings (nZEB) strategies in extreme climatic conditions of Iraq
Ahmed, A. 2020. An 80-year projection of net zero energy buildings (nZEB) strategies in extreme climatic conditions of Iraq. International Journal of Building Pathology and Adaptation. 38 (3), pp. 472-492. https://doi.org/10.1108/IJBPA-02-2019-0014
4D Printing of origami structures for minimally invasive surgeries using functional scaffold
Langford, T, Mohammed, A., Essa, K., Elshaer, A. and Hassanin, H. 2020. 4D Printing of origami structures for minimally invasive surgeries using functional scaffold. Applied Sciences. 11 (1), p. 332. https://doi.org/10.3390/app11010332
Reconfigurable multipoint forming using waffle-type elastic cushion and variable loading profile
Hassanin, H., Mohammed, M., Abdel-Wahab, A. and Essa, K 2020. Reconfigurable multipoint forming using waffle-type elastic cushion and variable loading profile. Materials.
3D printing of solid oral dosage forms: numerous challenges with unique opportunities
Hassanin, H. 2020. 3D printing of solid oral dosage forms: numerous challenges with unique opportunities. Journal of Pharmaceutical Sciences. https://doi.org/10.1016/j.xphs.2020.08.029
Design optimisation of additively manufactured titanium lattice structures for biomedical implants
El-Sayed, M.A., Essa, K., Ghazy, M. and Hassanin, H. 2020. Design optimisation of additively manufactured titanium lattice structures for biomedical implants. The International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-020-05982-8
4D Printing of NiTi auxetic structure with improved ballistic performance
Hassanin, H., Abena, A., Elsayed, M.A. and Essa, K. 2020. 4D Printing of NiTi auxetic structure with improved ballistic performance. Micromachines. 11 (8), p. 745. https://doi.org/doi.org/10.3390/mi11080745